|
|
Fluke Networks DSX2-5-IE-K1
Catalog #: 5081185
Industrial Ethernet Cable Validation and Troubleshooting Kit
- Overview
- Specifications
- Summary
- Reflectometers
- Adapters
- Reference Modules
Product Highlights
- Industrial Ethernet Cable Validation and Troubleshooting Kit
- Reduce failures by validating cables from End to End:
- Susceptibility to vibration, moisture, temperature and noise
- Poor connections that can become intermittent over time
- Ability to operate at rated cable speed
- Avoid wasting time installing bypass cables. Pass/Fail indication in 10 seconds with full measurement details
- Validate at the Machine Builder and again when commissioning the machine at the Plant, and after making changes.
- Supports RJ45 and M12D and M12X connectors
- Supports EtherNet/IP, Profnet, ModBus TCP and other protocols
- Document test results with LinkWare software
Each Unit Includes
- Versiv Mainframe & Remote
- (2) DSX-5000 Copper CableAnalyzer Modules
- Set of Cat 6A/Class EA Channel Adapters
- Set of M12X adapters
- Set of M12D adapters
- Reference Module
- (2) Headsets
- (2) Hand strap
- (2) Shoulder Straps
- Carry Case
- USB Interface Cable
- (2) AC Chargers
- Integrated Wi-Fi
- Statement of Calibration
- Getting Started Guide
| DSX CableAnalyzer Series Specifications |
| Cable Types |
| Shielded and unshielded pair LAN cabling |
TIA Cat 3, 4, 5, 5e, 6, 6A, 100 Ω ISO/IEC Class C, D, E, EA, F, FA and I/II: 100 Ω and 120 Ω |
| Standard Link Interface Adapters |
| Permanent link adapters |
Plug type: shielded RJ45
Optional Plug type: Tera |
| Channel Adapters |
Jack type: shielded RJ45
Optional Jack type: Tera, GG45 |
| Test Standards |
| TIA |
Cat 3, 4, 5, 5e, 6, 6A, 8 per TIA 568 Series |
| ISO/IEC |
Class C, D, E, EA, F, FA, I/II certification per ISO/IEC 11801 Series |
| Maximum frequency |
DSX-5000 1000 MHz |
| General Specifications |
| Autotest Time |
DSX-5000: Full 2-way Autotest of Cat 5e or 6/Class D or E: 9 seconds Full 2-way Autotest of Cat 6A/Class EA: 10 seconds |
| Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests) |
Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-tocrosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F) |
| Input protection |
Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage |
| Display |
5.7 in LCD display with a projected capacitance touchscreen |
| Case |
High impact plastic with show absorbing overmold |
| Dimensions |
Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm) |
| Weight |
Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg) |
| Main unit and remote |
Lithium ion battery pack, 7.2 V |
| Typical battery life |
8 hours |
| Charge time* |
Tester off: 4 hours to charge from 10 % capacity to 90 % capacity |
| Languages supported |
English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian |
| Calibration |
Service center calibration period is 1 year |
| Integrated Wi-Fi |
Meets IEEE 802.11 a/b/g/n; dual band (2.4 GHz and 5 GHz) |
| Power Supply Voltage |
Battery Powered |
| Product Height |
11.50 IN |
| Product Length |
16.50 IN |
| Product Width |
15.74 IN |
| Shipping Weight |
13.1 LBS |
| Country of Origin |
United States |
| Shipping Height |
29.21 IN |
| Shipping Length |
16.5 IN |
| Shipping Width |
15.5 IN |
|
Reflectometers
Adapters
Reference Modules
|