|
|
|
|
AEMC PEL 102
Catalog #: 2137.51
Power and Energy Logger Model PEL 102 (No LCD, w/3 MA193-10-BK Sensors) {ETL}
- Overview
- Specifications
- Summary
- Current Clamps/Probes
- Accessories
Product Highlights
- Power & Energy Logger Model PEL 102 (no LCD)
- Power/Energy data logging for 50Hz, 60Hz, and 400Hz and DC distribution systems.
- USB, LAN, and Bluetooth communication
- 17 types of supported hook-ups or electrical distribution systems
- All in one kit, including (3) 10,000A mini-flex probes (3" diameter)
- Economical Compact Simple To Use
- Simple to use, single, dual-split and three phase (Y, Δ) power & energy loggers
- Offers all the necessary functions for Power/Energy data logging for most of the 50Hz, 60Hz, and 400Hz and DC distribution systems worldwide offering numerous distribution set-ups
- Direct current measurements from 50mA up to 10,000A with MA193 external current sensors
- Power measurements: VA, W and var
- Energy measurements VAh, Wh (source/load indication) and varh (including quadrant indication)
- Power Factor (PF), Cos (Φ), and Tan (Φ)
- Crest Factor
- Total Harmonic Distortion (THD) for voltages and currents
- Harmonics from the fundamental signal up to the 50th order for 50/60Hz voltages and currents
- Frequency measurements
- RMS and DC measurements @ 128 samples/cycle – each phase simultaneously
- Bright blue triple LCD on the Model PEL 103 (3 phases shown simultaneously)
- Storage of measured and calculated values on a SD-Card or SDHC-Card
- Automatic recognition of the connected current sensors/probes
- Configuration of current and voltage ratios to external PT and CT ratios
- 17 types of supported hook-ups or electrical distribution systems
- USB, LAN, and Bluetooth communication
- DataView® software for data recovery, real-time communication with a PC and report generation with pre-written templates
Supported Networks
- Single-Phase 2-Wire
- Single-Phase 3-Wire (Split-phase from a center tap transformer)
Three-Phase 3-Wire Power Networks
- Three-phase 3-wire Δ (with two current sensors)
- Three-phase 3-wire Δ (with three current sensors)
- Three-phase 3-wire Open Δ (with two current sensors)
- Three-phase 3-wire Open Δ (with three current sensors)
- Three-phase 3-wire Y (with two current sensors)
- Three-phase 3-wire Y (with three current sensors)
- Three-phase 3-wire Δ Balanced (with one current sensors)
Three-phase 4-Wire Y Power Networks
- Three-phase 4-wire Y (with three current sensors)
- Three-phase 4-wire Y Balanced
- Three-phase 4-wire Y 2 1/2 Element
- Three-phase 4-wire Δ
- Three-phase 4-wire Open Δ
DC Power Networks
- DC 2-wire
- DC 3-wire
- DC 3-wire
Each Unit Includes
- MiniFlex® Model MA193-10-BK (x3)
- Small Classic Tool Bag (x1)
- Multiflex Mounting System (x1)
- One of: PEL 102 or PEL 103
- Black Test Leads and Alligator Clips (x4)
- USB-SD-Card Adapter (x1)
- Power Cord (x1)
- USB Stick with DataView® and User Manuals (x1)
- 5ft USB Cable (x1)
- Color-coded ID Markers (x12)
| MODELS |
PEL 102 & PEL 103 |
| GENERAL |
| Sampling Frequency |
128 samples per cycle; 50/60Hz (16 samples/cycle 400Hz) |
| Data Storage Rate |
1 per second |
| Demand Period Storage Rate |
User selectable (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes) |
Recorded Parameters
(Single- and Poly-Phase) |
V, I, W, VA, var, PF, Tan, Wh, VAh, VARh, THD (V and I),
Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF |
| Event Log |
Tracks and records status changes and error messages along with recorded data |
| Front Panel Indicator LEDs |
Bluetooth active, recording in progress, phase connection reversal, overload, battery charging and SD Card status |
| Storage Capacity |
2GB SD card (included) is used for storage. SD cards (up to 2GB); SDHC cards (4 to 32GB) formatted FAT32 are supported |
| INPUTS |
Voltage |
3 voltage input channels via 4mm safety banana jacks |
| Current |
3 current input channels via custom 4 pin jacks that accept AEMC ® probes and sensors |
| ELECTRICAL |
| VOLTAGE MEASUREMENT |
RANGE |
RESOLUTION |
* ACCURACY (% of Reading) |
| 50/60Hz |
42.5 to 69Hz |
- |
±0.1Hz |
| Single-Phase RMS Voltages |
10 to 1000Vrms |
0.1V |
±0.2% Rdg ± 0.2V |
| Phase-to-Phase RMS Voltages |
17 to 1700Vrms |
0.1 to 1V |
±0.2% Rdg ± 0.4V |
| 400Hz |
340 to 460Hz |
- |
- |
| Single-Phase RMS Voltages |
10 to 600Vrms |
0.1V |
±1% Rdg ± 1V |
| Phase-to-Phase RMS Voltages |
17 to 1200Vrms |
0.1 to 1V |
±1% Rdg ± 1V |
| DC |
100 to 1000V |
0.1V |
±1% Rdg ± 3V (typical) |
| PT Ratios |
Programmable from 50V to 65,0000V |
0.01V to 0.1V |
- |
| CURRENT MEASUREMENT |
| Current Probe: MiniFlex ® Sensor MA193*** |
200mA to 100Arms |
1 to 100mA |
±1.2% ± 50mA |
| 0.8A to 400Arms |
10 to 100mA |
±1.2% ± 0.2A |
| 4A to 2000Arms |
0.1 to 1A |
±1.2% ± 1A |
| 20A to 10,000Arms |
0.1 to 10A |
±1.2% |
| CT Ratios |
Programmable from 1:1 to 25,000:1 (probe dependent) |
| POWER MEASUREMENTS |
| Active Power (P)* |
-2 to 2GW |
0.001W |
±0.5% Rdg ± 0.005% Pnom |
| Reactive Power (Q)* |
-2 to 2Gvar |
0.001var |
±1% Rdg ± 0.01% Qnom |
| Apparent Power (S)* |
0 to 2GVA |
0.001VA |
±0.5% Rdg ± 0.005% Snom |
| Power Factor |
-1 to +1 |
0.001 |
± 0.05 |
| Tangent f (active/reactive power ratio) |
-3.2 to +3.2 |
0.001 |
± 0.02 |
| ENERGY MEASUREMENTS |
| Active Energy (EP) |
0 to 4 x 10 18 |
1Wh |
±0.5% Rdg |
| Reactive Energy (EQ) |
0 to 4 x 1018 |
1varh |
±2% Rdg |
| Apparent Energy (ES) |
0 to 4 x 1018 |
1Vah |
±0.5% Rdg |
| THD |
± 655% |
| Individual Harmonics |
1 to 50 displayed in percentage; 1 to 7 at 400Hz |
| External Supply |
110V/250V (10%) @ 50/60Hz; 400Hz |
| Back-Up Power Source/Charge Time |
Rechargeable 8.4V NiMH battery pack / Approximately 5 hours |
| Battery Life |
30 minutes minimum, 60 minutes typical |
| MECHANICAL |
| Communication Ports |
USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 ** |
| Dimension/Weight |
10.08 x 4.92 x 1.46" (256 x 125 x 37mm) / <1kg |
| Case/Index of Protection |
Double insulated, rubber over-molded, polycarbonate UL94 V1 rated / IP54 non operating |
| Mounting/Security |
Embedded magnets on back side, keyhole slot on back side / Kensington anti-theft system |
| DISPLAY |
| Display Type for Model PEL 103 |
2.63 x 2.16" (67 x 55mm), four line, monochrome, backlit LCD with adjustable brightness and contrast |
| ENVIRONMENTAL / SAFETY |
| Operating Temperature/Relative Humidity |
50° to 122°F (10° to 50°C) / up to 85% |
| Storage Temperature |
-4° to 122°F (-20° to 50°C) with batteries; -4° to 158°F (-20° to 70°C without batteries) |
| Safety Rating/CE Rating |
Complies with IEC 61010-1:Ed3, and IEC 61010-2-030:Ed1 for 1000V CAT III / 600V CAT IV, Pollution Degree 2 / Yes |
* Maximum value is current probe dependent.
** Computers with Class II Bluetooth will restrict range to 40 ft. Computers without Bluetooth will require a Class I or Class II Bluetooth radio adapter.
*** Maximum current reduced by a factor of 2 for 400Hz fundamental frequency. |
| Power Measurement/Power Loggers Template |
| Input(power loggers) |
Single Phase, Three Phase |
| Type(Power loggers) |
Digital, Portable Hand Held |
| Maximum Current AC |
10000 A |
| Maximum Current DC |
5000 A |
| Maximum Voltage AC |
1000 V |
| Maximum Voltage DC |
1000 V |
| True RMS |
Yes |
| Power Quality |
No |
| Current Input Channels |
1, 2, 3 |
| Voltage Input Channels |
1, 2, 3 |
| Measurement Frequency |
40 Hz, 400 Hz, 50 Hz, 60 Hz |
| Transient Capture |
No |
| Displays Waveform |
No |
| Energy |
Yes |
| Phasor Diagrams |
Yes |
| Power Factor (Power Quality) |
Yes |
| Harmonics |
Yes |
| Total Harmonic Distortion |
Yes |
| Current Clamps Included |
Yes |
| Blue Tooth Compatable |
Yes |
| CAT Rating |
IV |
| CAT Voltage Rating (V) |
600V |
| Data Logging |
Yes |
| Unique Features |
USB,LAN and Class 1 Bluetooth
Removable SD card with provided reader |
| Warranty |
1 YEARS |
| Additional Info/Comments |
2 DC current probes- MR 193 up bto 1500A DC and J93 up to 5000 amps DC
no LCD display
Android App allows viewing remotely or through Bluetooth |
| Calibration Included |
Factory Calibration |
| Power Supply Voltage |
120V 50/60 Hz, 120V/220V Universal |
| Safety Approval |
CE, CSA, ETL |
| Interfaces I/O |
Bluetooth, LAN / Ethernet, USB |
| Storage |
SD Card |
| IP Rating |
IP54 |
| Product Weight |
2.2 LBS |
| Battery Type |
NimH |
| Product Height |
10.08 IN |
| Product Length |
4.92 IN |
| Product Width |
1.46 IN |
| Shipping Weight |
11 LBS |
| ECCN Number |
EAR99 |
| HTS/Schedule B Number |
9030390100 |
| Country of Origin |
France |
| Shipping Height |
16 IN |
| Shipping Length |
14 IN |
| Shipping Width |
8 IN |
| UPC |
685338220469 |
|
Current Clamps/Probes
| Product |
Price |
 |
AEMC 193-24-BK
Catalog #: 2140.34
AmpFlex Sensor 24" Model 193-24-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8435 and PEL Series
|
$310.23
|
 |
AEMC 193-36-BK
Catalog #: 2140.35
AmpFlex Sensor 36" Model 193-36-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8435 and PEL Series
|
$360.23
|
 |
AEMC MA193-10-BK
Catalog #: 2140.48
MiniFlex Sensor Model MA193-10-BK for Models 3945-B, 8220, 8230, 8333, 8335, 8336, 8435 and PEL Series
|
$222.21
|
 |
AEMC MA193-14-BK
Catalog #: 2140.50
MiniFlex Sensor Model MA193-14-BK for Models 3945-B, 8220, 8230, 8333, 8335, 8336, 8435 And PEL Series
|
$325.21
|
 |
AEMC MN193-BK
Catalog #: 2140.36
AC Current Probe Model MN193-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8435, PEL Series, L104 and L564
|
$270.21
|
 |
AEMC MN93-BK
Catalog #: 2140.32
200A AC Current Probe Model MN93-BK
|
$194.21
|
 |
AEMC MR193-BK
Catalog #: 2140.28
AC/DC Current Probe Model MR193-BK (1000AAC/1400ADC) for use with Models 3945/3945-B, 8220, 8230, 8335 & PEL Series
|
$419.21
|
 |
AEMC SL261
Catalog #: 1201.51
AC/DC Current Probe Model SL261 (BNC - 100mV/A - 10A peak & 10mV/A - 100A peak)
|
$459.21
|
 |
AEMC SR193-BK
Catalog #: 2140.33
AC Current Probe Model SR193-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336,8435, PEL Series, L104 and L564
|
$324.21
|
Accessories
| Product |
Price |
 |
AEMC 2119.82
Catalog #: 2119.82
Bag Large Multi-purpose Canvas Bag (22 x 10.5 x 12" - used in Ground Kits)
|
$163.23
|
 |
AEMC 2133.73
Catalog #: 2133.73
Bag Extra Large Classic Tool Bag (Replacement for Models 3945/3945-B, 6240, 6250, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336 and PEL 105)
|
$100.23
|
 |
AEMC 2136.80
Catalog #: 2136.80
Cable - Replacement USB Cable, 10ft for Models 8510, 8335 & C.A 6116
|
$40.23
|
 |
AEMC 2137.82
Catalog #: 2137.82
Pole Mounting Kit
|
$235.23
|
 |
AEMC 2140.19
Catalog #: 2140.19
Battery Replacement 9.6V NiMH Rechargeable for Models 3945/3945-B, 6550, 6555, 8333, 8335, 8336, 8435, OX Series, and C.A 6116
|
$200.23
|
 |
AEMC 2152.05
Catalog #: 2152.05
Lead - Set of 2, Color-coded (Red/Black) Silicone Leads, Test Probes & Alligator Clips {Rated 1000V CAT IV} (Replacement for Models 401, 403, 405, 407, 601, 603, 605, 607, F05 & F09)
|
$0.00
|
 |
AEMC 5000.14
Catalog #: 5000.14
Power Cord 115V for Micro-ohmmeters, Megohmmeters, Power Instruments, Oscilloscopes and Ground Testers
|
$9.21
|
 |
AEMC 5000.19
Catalog #: 5000.19
Adapter Replacement Power Adapter 110V/230V with US Power Cord for use with Models 8333, 8335, 8336, PEL 105, and C.A 6116
|
$172.21
|
 |
AEMC 5000.44
Catalog #: 5000.44
MultiFix (Universal Mounting System) for use with Models 5212, 5215, 5217, 5231, 5233, 6527, 1510, and L452
|
$17.21
|
 |
AEMC 5000.45
Catalog #: 5000.45
Replacement USB SD-Card Adapter for Power Energy Logger Models PEL 102 and PEL 103
|
$14.21
|
 |
AEMC 5000.60
Catalog #: 5000.60
Adapter - RS-232 to USB 2.0 {Replacement for Models 3945-B, 1060, 5060, 5070, 6250, and 6255}
|
$38.21
|
 |
AEMC 5000.63
Catalog #: 5000.63
Power Cord 110V for use only with Model 8435
|
$50.21
|
 |
AEMC 5000.77
Catalog #: 5000.77
Cable Reeling Box
|
$16.21
|
|
|
|