|
|
|
|
Fluke Networks MS-POE
Catalog #: 5018508
MicroScanner Copper Cable Verifier and PoE Tester, RJ-45 Category 5-6A Ethernet, Power over Ethernet PSE Devices
- Overview
- Specifications
- Summary
- Tone Probe Kits
- Accessories
Product Highlights
- Copper cable verifier with swift and simple PoE testing for ethernet powered devices such as VOIP phones, cameras, lighting, 802.11n WAPs, detects voltages from active 802.3at/af/bt, PSE sources, negotiates and solicits PoE, Cisco UPOE, and PoH from active sources at the hardware or link layer with LLDP, shows maximum class of power available and voltage to 90W, Ethernet Alliance EA8 Certified
- Includes MicroScanner POE (Power over Ethernet) cable verifier with detachable wiremap adapter, Getting Started Guide (10 languages), 2 AA alkaline batteries, and carry pouch, one year warranty
- Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 1 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wiremap, cable ID, and distance to fault, detects POTS
- Test voice/data/video cables with integrated RJ45 which support low-voltage testing with no need for adapters, ensures high quality installations and quick troubleshooting in active network environment, measures length (460m or 1500 feet with resolution to 0.3m or 1 foot), wiremap to TIA-568A/B standards, remote ID locators (sold separately)
- Rugged and ergonomic easy-grip rubber design, locates virtually any cable or wire pair with IntelliTone digital and analog toning, probe sold separately
Each Unit Includes
- 1 - Detachable wiremap adapter
- 1 - User manual
- 2 - AA alkaline batteries
- 1 - Carry pouch
- 1 - One-Year warranty
| Environmental Specifications |
| Operating Temperature |
32 °F to 113 °F (0°C to 45 °C) |
| Storage Temperature |
-4 °F to +140 °F (-20 °C to +60 °C) |
Operating relative humidity
(% RH without condensation) |
90% (50 °F to 95 °F 10 °C to 35 °C)
75% (95 °F to 113 °F 35 °C to 45 °C) |
| Shock and Vibration |
Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached |
| Safety |
IEC 61010-1 3rd Edition |
| Altitude |
4,000 m; Storage 12,000 m |
| EMC |
IEC 61326-1 |
| Genertal Specifications |
| Test Connector |
Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs |
| Power |
Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NiMH, NiCAD |
Dimension and weight
(with batteries installed and wiremap adapter attached) |
3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
Microscanner PoE: 10.6 oz (247 g) |
| Display |
Monochrome LCD with backlight |
| Test Modes |
| Cable test |
Measure length, verifies wairemap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of th cable is more than 12.5 Ω. Display results on one device. |
| Tone |
Generates Intellitone and normal analog toning signals |
| PoE |
Solicits and detects the presence o 802.3af, at, bt devices. |
| Performace Specifications |
| Cable types tested |
Twister pair: UTP, FTP, SSTP |
| Length test |
Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ±4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: user-settable NVP for twisted pair and coax. Can determine actual NVP with known length of cable. |
| Wiremap |
Detects single-wire faults, shorts, miswires, split pairs,a nd up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults. |
| Ethernet port detection |
Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, 10 Gbps. |
| Tone Generator |
Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe. Generates four tones compatible with typical analog probes. SmartTone feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe. |
| Warranty |
1 YEARS |
| Product Height |
3.23 IN |
| Product Length |
10.44 IN |
| Product Width |
6.46 IN |
| Shipping Weight |
1.411 LBS |
| Battery Type |
AA |
| Country of Origin |
Malaysia |
| Shipping Height |
3.228 IN |
| Shipping Length |
10.433 IN |
| Shipping Width |
6.457 IN |
| UPC |
754082148524 |
|
Tone Probe Kits
Accessories
|
|
|