|
|
|
|
Fluke 805 FC
Catalog #: 4489229
Vibration Meter with Fluke Connect Compatibility
- Overview
- Specifications
- Summary
- Accessories
Product Highlights
- 805 FC Fluke Connect Vibration Meter
- Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
- Consistent data quality at both low and high frequency ranges
- Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
- Exportable data via USB
- Trending in Microsoft Excel using pre-built templates
- Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
- Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
- Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
- Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live video call*
- Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
- Temperature measurement with Spot IR Sensor increases diagnostic capabilities
- On-board memory holds and saves up to 3,500 measurements
- External accelerometer support for hard to reach locations
- Flashlight for viewing measurement locations in dark areas
- Large screen with high resolution for easy navigation and viewing
Each Unit Includes
- 805 FC Vibration Meter
- USB Cable
- Storage Case
- Belt Holster
- Quick Reference Guide
- CD-ROM (includes MS Excel template and documentation)
- Four AA batteries.
- ISO 9001 - Statement of Calibration Practices
| Technical specifications Fluke 805 FC |
| Vibration meter |
Low frequency range
(overall measurement) |
10 Hz to 1,000 Hz |
High frequency range
(CF+ measurement) |
4,000 Hz to 20,000 Hz |
| Severity levels |
Good, Satisfactory, Unsatisfactory,
Unacceptable |
| Vibration limit |
50 g peak (100 g peak-peak) |
| A/D converter |
16-bit |
| Signal to noise ratio |
80 dB |
| Sampling rate |
| Low frequency |
20,000 Hz |
| High frequency |
80,000 Hz |
| Real time clock backup |
Coin battery |
| Sensor |
| Sensitivity |
100 mV / g ± 10% |
| Measurement range |
0.01 g to 50 g |
Low frequency range
(overall measurement) |
10 Hz to 1,000 Hz |
High frequency range
(CF+ measurement) |
4,000 Hz to 20,000 Hz |
| Resolution |
0.01 g |
| Accuracy |
At 100 Hz ± 5 % of measured value |
| Amplitude units |
| Acceleration |
g, m/sec 2 |
| Velocity |
in/sec, mm/sec |
| Displacement |
mils, mm |
| Infrared thermometer (temperature measurement) |
| Range |
-20 °C to 200 °C (-4 °F to 392 °F) |
| Accuracy |
±2 °C (4 °F) |
| Focal length |
Fixed, at ~3.8 cm (1.5″) |
External sensor
Note: Fluke supports, but does not provide, external sensors. |
| Frequency range |
10 Hz to 1,000 Hz |
| Bias voltage (to supply power) |
20 V dc to 22 V dc |
| Bias Current (to supply power) |
Maximum 5 mA |
| Firmware |
| Calibration |
Factory calibration required |
| External interfaces |
USB 2.0 (full speed) communication |
| Data capacity |
Database on internal flash memory |
| Upgrade |
through USB |
| Memory |
Up to 3,500 measurements |
| Radiated emission |
| Electrostatic discharge: Burst |
Standard EN 61000-4-2 |
| Electromagnetic interference |
Standard EN 61000-4-3 |
| RE |
Standard CISPR 11, Class A |
| Environmental |
Operating
temperature |
-20 °C to 50 °C (-4 °F to 122 °F) |
Storage
temperature |
-30 °C to 80 °C (-22 °F to 176 °F) |
Operating
humidity |
10 % to 95 % RH
(non-condensing) |
Operating/
Storage altitude |
Sea Level to 3,048 meters
(10,000 feet) |
| IP rating |
IP54 |
| Vibration limit |
500 g peak |
| Drop test |
1 meter |
| General specifications |
| Battery type |
AA (2)Lithium Iron Disulfide |
| Battery life |
250 measurements |
| Size (L x W x H) |
25.72 cm x 16.19 cm x 9.84 cm
(10.13 in x 6.38 in x 3.875 in) |
| Weight |
1.16 kg (2.55 lb) |
Fluke Connect™
mobile app
compatible* |
Yes |
| Connectors |
USB mini-B 7-pin, external sensor
jack (SMB connector) |
| Frequency Range |
20000 Hz |
| Single Axis Measurement |
Yes |
| Tri-Axial Measurement |
No |
| Tachometer Capability |
No |
| |
| Unique Features |
Fluke Connect system capable.
Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure.
Consistent data quality at both low and high frequency ranges.
Four-level scale indicates severity of problems for overall vibration and bearing condition
Exportable data via USB.
Trending in Microsoft® Excel using built-in templates.
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines. |
| Warranty |
1 YEARS |
| Power Supply Voltage |
Battery Powered |
| Data Logging |
Yes |
| Interfaces I/O |
Other, USB |
| Product Weight |
0.89 LBS |
| Battery Type |
AA |
| Product Height |
9.5 IN |
| Product Length |
2.8 IN |
| Product Width |
2.3 IN |
| Shipping Weight |
2 LBS |
| Country of Origin |
USA |
| UPC |
095969726863 |
|
Accessories
| Product |
Price |
 |
Fluke 805/ES
Catalog #: 4636786
External Vibration Sensor
|
$1,400.00
|
|
|
|