Product Highlights

• Validate cable performance to support Ethernet/IP, PROFINET, EtherCAT
  
• Identify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables
  
• Identify connected switch information (Switch Name, Port Number, and VLAN)
  
• Install and troubleshoot PoE devices via Switch Negotiation and PoE Load Tests
  
• Document work through LinkWare™ PC
  
• Generates analog or digital tones compatible with IntelliTone™ Probes (not included) or Pro3000™ (not included) to assist in locating cables in walls or telecommunications rooms
  
• Blink port light on switch to help identify connected switch ports
  
• Compatible with MicroScanner™ PoE Remote Identifiers for Ethernet outlet identification
  
• Touch sensitive gesture-based display
  
• Rechargeable Li-Ion battery
  
• Easy Feature and Network Testing Upgrades via USB-C via LinkWare™ PC
  
• Charging via standard USB-C port
  

General Specifications

• Languages supported in UI: English (SW v1.0) Weight 1 lbs 6 oz (624g)
  
• Battery type: Lithium-ion, 3.6 V, 6400 mAh
  
• Battery life: 8 hours typical
  
• Battery charge time: 4.5 hours
  
• Battery charging temperature range: 0 °C to +40 °C
  
• Power adapter input: 100 to 240 VAC ±10%, 50/60Hz
  
• Power adapter output: 15 VDC, 2 A maximum; Class II
  
• Host interface: USB type C Display 800 x 480 color capacitive multi-touch
  
• Dimensions: 8.5 in. x 4.5 in.
  
• Operating temperature 0°C to 45°C
  
• Storage temperature: -20°C to 50°C (-4°F to 122°F)
  
• Operating relative humidity: 0% to 90%, 0°C to 35°C; 0% to 70%, 35°C to 45°C
  
• Operating altitude: 4,000 m; 3,200 m with ac adapter
  
• Vibration: Random, 2 g, 5 Hz-500 Hz
  
• Drop: 1 m drop, 6 sides
  

Active Network Diagnostics

• Diagnostic protocols: Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP)
  
• Nearest device diagnostics (if available through diagnostic protocols): Switch Name, Port Number, VLAN Name, Advertised Data Rates, Advertised Duplex
  
• Power over Ethernet (PoE) compatibility: IEEE 802.3af/at (SW v1.0), Hardware negotiation with signature resistance, Software negotiation with LLDP/CDP
  
• Power over Ethernet (PoE) diagnostics: Advertised Power Class (1 to 4) (SW v1.0), Advertised Available Power, Powered Pairs, Diagnostics for both Single and Dual signatures
  
• Power over Ethernet (PoE) measurements: Loaded Voltage (V), Loaded Power (W) Port Blink Blink the light of the connected port
  

Cable Test Specifications

• Test port: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs
  
• Commissioning autotests 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire Map (only); Test Speed: 6 seconds for lengths < 70 m
  
• Cable types: Balanced twisted-pair cabling; Unshielded twisted-pair; Screened twisted-pair; 2-pair and/or 4-pair
  
• Wire map-only tests: Document wire map, Length of each pair, Diagnose split pairs, User selectable T568A or T568B, User selectable crossover settings (Straight through, Half-crossover, Full-crossover); Test speed: 1 second for lengths < 120 m
  
• Length (maximum): 305 m (1000 ft) Nominal Velocity of Propagation (NVP) User settable
  
• Remote ID locators: Use remote ID terminations to identify up to 7 unique ports or office outlets

Each Unit Includes

• 1 - LinkIQ™ Industrial Ethernet Cable + Network Tester with Multi-Connector Adapter and Magnetic Strap
• 1 - RJ45 Remote-ID #1
• 1 - USB-C to USB-A Cable
• 1 - Charging Cable
• 1 - Cat 6A Patch Cord
• 1 - RJ45 male to RJ45 Female Patch Cord
• 1 - RJ45/M12X Patch Cord
• 1 - RJ45/M12D Patch Cord
• 1 - RJ45/M8D Patch Cord
• 1 - RJ45/11 Modular Adapter
• 1 - Hanging Strap with Remote ID Holder
• 1 - Duffle Bag
• 1 - Quick Reference Guide