| Model: AT-8030 Specifications |
| Description |
Advanced Industrial Wire Tracer Kit |
| Kit Includes |
AT-8000-R Receiver (1)
AT-8000-T Transmitter (1)
TL-8000 Test Lead And Accessory Kit (1)
CC-8000 Hard Carrying Case (1)
User Manual & QSG (1)
Battery Chargers (3)
Rechargeable Batteries (12)
CT-400 Signal Clamp (1)
HS-1 Magnetic Hanger (1) |
| |
AT-8000-R Receiver |
AT-8000-T Transmitter |
| Measurement Category |
CAT IV 600 V |
CAT IV 600 V |
| Display size |
3.5 in (8.9 cm) |
(LED signals) |
| Display Dimensions (W x H) |
2.76 x 2.07 in (70 x 52 mm) |
– |
| Display Resolution |
320px x 240px |
– |
| Display type Color |
TFT LCD |
– |
| Color Display |
• |
– |
| Booting time |
30 sec |
< 2 sec |
| Backlight |
• |
– |
| LED Indicator |
Green Flashing: Signal Detection |
Operating mode LEDs: red
Battery status LEDs: green, yellow, red |
| Operating Temperature range |
-4 °F to 122 °F (-20 °C to 50 °C) |
-4 °F to 122 °F (-20 °C to 50 °C) |
| Operating Humidity |
-4 °F to <50 °F (45%: -20 °C to <10 °C)
50 °F to <86 °F (95%: 10 °C to <30 °C)
86 °F to <104 °F (75%: 30 °C to <40 °C)
104 °F to 122 °F (45%: 40 °C to 50 °C) |
-4 °F to <50 °F (45%: -20 °C to <10 °C)
50 °F to <86 °F (95%: 10 °C to <30 °C)
86 °F to <104 °F (75%: 30 °C to <40 °C)
104 °F to 122 °F (45%: 40 °C to 50 °C) |
| Storage temperature and humidity |
-4 °F to 158 °F (-20 °C to 70 °C), ≤ 95% RH |
-4 °F to 158 °F (-20 °C to 70 °C), ≤ 95% RH |
| Operating altitude |
0 to 6561 ft (0 to 2000 m) |
0 to 6561 ft (0 to 2000 m) |
| Transient protection |
– |
8.00 kV (1.2/50 S surge) |
| Pollution degree |
2 |
2 |
| IP Rating |
IP 52 |
IP 40 |
| Drop test |
3.28 ft (1 m) |
3.28 ft (1 m) |
| Power Supply |
4 x AA (alkaline or NiMH rechargeable) |
8 x AA (alkaline or NiMH rechargeable) |
| Power consumption |
4xAA battery: 2W |
Hi/Lo mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal transmission: 10 mA |
| Battery life |
Approx. 9 h |
Hi/Lo mode: approx. 25 h
Loop mode: approx. 18 h |
| Low battery indication |
• |
• |
| Fuse |
– |
1.6 A, 700 V, fast-acting,
Ø 6x32mm |
| Maximum conductor size |
– |
– |
| Response time |
Smart mode: 750 ms
Tip Sensor Energized: 300 ms
Tip Sensor De-Energized: 750 ms
NCV: 500 ms, Battery monitoring: 5 s |
Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec |
| Voltage Warning Indicator |
– |
> 30 V AC/DC |
| Non-Contact Voltage (NCV) |
90-600 V AC |
- |
| Signal indications |
Audible beep, bargraph display, numeric display |
LEDs and audible beep |
| Operating Frequency |
Energized: 6.25 kHz
De-Energized: 32.768 kHz |
Energized: 6.25 kHz
De-Energized: 32.768 kHz |
| Acoustic Indication |
Piezo Buzzer |
Audible beep |
| Range Detection (Open air) |
SmartSensor™:
Pinpointing: Around 2 in (5 cm) radius (+ - 2%)
Direction indication: Up to 5 ft (1.52 m) (+ - 2%)
Tip sensor (Energized):
Pinpointing: Around 2 in (5 cm) (+ - 1%)
Detection: Up to 22 ft (6.7 m) (+ - 1%)
Tip sensor (De-energized):
Detection: Up to 14 ft (4.3 m) (+ - 5%)
NCV detection (40 to 400 Hz):
Pinpointing: Around 2 in (5 cm) radius (+ - 5%)
Detection: Up to 4 ft (1.2 m) (+ - 5%) |
- |
| Current Output of signal (typical) |
– |
Energized circuit:
HI mode: 60 mA RMS
LO mode: 30 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
LO mode: 40 mA RMS
Loop mode: 160 mA RMS |
| Signal voltage output (nominal) |
– |
De-energized circuit:
LOW: 29 V RMS, 120 Vp-p
HIGH: 33V RMS, 140 Vp-p
With CT-400: loop mode: 31 V RMS, 120 Vp-p |
| Dimensions (L x W x H) |
Approx. 10.92 x 4.43 x 2.55 in | (278 x 113 x 65 mm) |
Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm) |
| Weight |
1.20 lb (0.544 kg) |
Approx. 1.25 lb (0.57 kg) |