|
|
|
|
Fluke 87-V
Catalog #: 2074974
Digital Multimeter (87-V)
- Overview
- Specifications
- Summary
- Accessories
- Cases
- Current Clamps
- DMM Probe Kits
- Temp. Probes
Product Highlights
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- Large display digits and 2 level bright white backlight for increased visibility
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition ANSI and IEC electrical safety standards
- Improved sleep mode for long battery life
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Lifetime Warranty
Each Unit Includes
- 87V Industrial Multimeter
- TL75 Test Leads
- AC175 Alligator Clips
- Holster ( Yellow Rubber )
- 9V Battery (Installed)
- 80BK Temperature Probe
| Specifications |
| Voltage DC |
Maximum voltage |
1000 V |
| Accuracy |
±(0.05% + 1) |
| Maximum resolution |
10 µV |
| Voltage AC |
Maximum voltage |
1000 V |
| Accuracy |
±(0.7% + 2) True RMS |
| AC bandwidth |
20 kHz with low pass filter; 3 db @ 1 kHz |
| Maximum resolution |
0.1 mV |
| Current DC |
Maximum amps |
10 A (20 A for 30 seconds maximum) |
| Amps accuracy |
±(0.2% + 2) |
| Maximum resolution |
0.01 µA |
| Current AC |
Maximum amps |
10 A (20 A for 30 seconds maximum) |
| Amps accuracy |
±(1.0% + 2) True RMS |
| Maximum resolution |
0.1 µA |
| Resistance |
Maximum resistance |
50 MO |
| Accuracy |
±(0.2% + 1) |
| Maximum resolution |
0.1 O |
| Capacitance |
Maximum capacitance |
9,999 µF |
| accuracy |
±(1% + 2) |
| Maximum resolution |
0.01 nF |
| Frequency |
Maximum frequency |
200 kHz |
| Accuracy |
±(0.005% + 1) |
| Maximum resolution |
0.01 Hz |
| Duty cycle |
Maximum duty cycle |
99.90% |
| Accuracy |
±(0.2% per khz + 0.1%) |
| Maximum resolution |
0.10% |
| Temperature measurement |
–200.0°C – 1090°C |
| –328.0°F – 1994.0°F |
| excluding probe |
| 80 BK temperature probe |
–40.0°C – 260°C |
| –40.0°F – 500°F, 2.2°C or 2% whichever is greater |
| Conductance |
Maximum conductance |
60.00 nS |
| Accuracy |
±(1.0% + 10) |
| Maximum resolution |
0.01 nS |
| Diode |
Range |
3 V |
| Resolution |
1 mV |
| Accuracy |
±(2% + 1) |
| Duty cycle range |
Accuracy |
Within ±(0.2% per kHz + 0.1%) |
| Environmental Specifications |
| Operating temperature |
–20°C to + 55°C |
| Storage temperature |
–40°C to + 60°C |
| Humidity (without condensation) |
0% – 90% (0°C – 35°C) |
| 0% – 70% (35°C – 55°C) |
| Operating Altitude |
2000 m |
| Safety Specifications |
| Overvoltage category |
EN 61010–1 to 1000 V CAT III, 600V CAT IV |
| Agency approvals |
UL, CSA, TÜV, VDE listed |
| Mechanical and General Specifications |
| Size |
201 x 98 x 52 mm (with holster) |
| Weight |
355 g |
| 624 g – with holster |
| Display |
Digital |
6000 counts updates 4/sec. |
| 19,999 counts in high–resolution mode |
| Analog |
32 segments, updates 40/sec |
| Frequency |
19,999 counts, updates 3/sec at > 10 Hz |
| Warranty |
Lifetime |
| Battery Life |
Alkaline |
~400 hours typical, without backlight |
| Shock |
1 Meter drop per IEC 61010–1:2001 |
| Vibration |
Per MIL–PRF–28800 for a Class 2 instrument |
| Type |
Digital |
| Style |
Hand-Held |
| Measures AC V |
Yes |
| Measures DC V |
Yes |
| Measures AC A |
Yes |
| Measures DC A |
Yes |
| True RMS |
Yes |
| Maximum Voltage AC |
1000 V |
| Minimum Voltage AC |
0.1 mV |
| Resolution AC Volts |
0.1 mV |
| Maximum Voltage DC |
1000 V |
| Minimum Voltage DC |
0.1 mV |
| Resolution DC Volts |
0.1 mV |
| Maximum Current AC |
10 A |
| Minimum Current AC |
0.1 uA (0.00010 mA) |
| Resolution AC Current |
0.1 uA (0.00010 mA) |
| Maximum Current DC |
10 A |
| Minimum Current DC |
0.1 uA (0.00010 mA) |
| Resolution DC Current |
0.1 uA (0.00010 mA) |
| Basic Accuracy V DC |
± (0.05 % + 1) |
| # Digit Display |
4.5 |
| Counts |
6000 . |
| Backlight |
Yes |
| Manual/Autoranging |
Both |
| Dual Display |
No |
| Analog Bargraph on Display |
Yes |
| Decibels |
No |
| Resistance |
Yes |
| Frequency |
Yes |
| Continuity |
Yes |
| Capacitance |
Yes |
| Temperature |
Yes |
| Diode Testing |
Yes |
| CAT Rating |
IV |
| CAT Voltage |
1,000 V, 600 V |
| Peak Hold |
Yes |
| Overload Protector |
Yes |
| Kelvin 4-Wire Measurement Capability |
No |
| Intrinsically Safe |
No |
| Wireless Display |
No |
| Data Hold |
Yes |
| Low-Pass Filter |
Yes |
| Duty Cycle % |
Range: 0.0 to 99.9 %
Accuracy: Within ± (0.2 % per kHz + 0.1 %) for risetimes < 1 μs |
| |
| Unique Features |
•Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
•Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
•Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
•Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
•True-rms ac voltage and current for accurate measurements on non linear signals
•Selectable filter for accurate voltage and frequency measurements on motor drives
•0.05 % dc accuracy
•6000 counts, 3-3/4 digits
•4-1/2 digit mode for precise measurements (20,000 counts)
•Measure up to 1000 V ac and dc
•Measure up to 10 A, 20 A for up to 30 seconds
•Built in thermometer lets you carry one less tool (TC probe included)
•Frequency to 200 kHz and % duty cycle
•Resistance, continuity and diode test |
| Warranty |
10 YEARS |
| Additional Info/Comments |
•10,000 µF capacitance range for components and motor caps
•Min/Max-Average recording with Min/Max Alert to capture variations automatically
•Peak capture to record transients as fast as 250 µs
•Relative mode to remove test lead interference from low ohms measurements
•Auto and manual ranging for maximum flexibility
•Touch Hold to capture stable readings avoiding noisy signals
•Large display digits and two-level bright white backlight for increased visibility
•Analog bargraph for fast changing or unstable signals
•Input Alert provides audible warning against wrong use of input jacks
•Improved selectable sleep mode for long battery life
•Access door for fast battery changes without breaking the calibration seal
•"Classic" design with new removable holster with built in test lead and probe storage
•Lifetime warranty |
| Calibration Included |
Factory Calibration |
| Power Supply Voltage |
Battery Powered |
| Safety Approval |
CSA, UL |
| Data Logging |
No |
| Interfaces I/O |
Other, Analog Input |
| Product Weight |
0.78 LBS |
| Battery Type |
9v |
| Product Height |
1.25 IN |
| Product Length |
7.35 IN |
| Product Width |
3.41 IN |
| Shipping Weight |
1.37 LBS |
| ECCN Number |
3A992 |
| Country of Origin |
United States |
| Shipping Height |
5.91 IN |
| Shipping Length |
12.99 IN |
| Shipping Width |
11.02 IN |
| UPC |
095969245241 |
|
Accessories
| Product |
Price |
 |
Fluke 80K-40
Catalog #: 382846
High Voltage Probe
|
$342.24
|
|
|
Fluke 80K-6
Catalog #: 532424
High Voltage Probe
|
$219.24
|
|
|
Fluke AC280
Catalog #: 1610115
SureGrip Hook Clips
|
$60.24
|
|
|
Fluke AC283
Catalog #: 1610144
SureGrip Pincer Clips
|
$60.24
|
|
|
Fluke AC285
Catalog #: 1610159
SureGrip Alligator Clips
|
$60.24
|
|
|
Fluke BP980
Catalog #: 1616807
Double Banana Plug Kit
|
$80.24
|
|
|
Fluke TL175
Catalog #: 3521976
TwistGuard™ Test Leads
|
$45.24
|
|
|
Fluke TL224
Catalog #: 1610198
SureGrip Insulated Test Leads
|
$45.24
|
|
|
Fluke TL26A
Catalog #: 1273172
5-Way Test Lead Set
|
$99.24
|
|
|
Fluke TL40
Catalog #: 1590606
Retractable Tip Test Lead Set
|
$68.24
|
|
|
Fluke TL71
Catalog #: 1274382
Premium Test Lead Set
|
$45.24
|
|
|
Fluke TL75
Catalog #: 855705
Hard Point Test Lead Set
|
$45.24
|
|
|
Fluke TL910
Catalog #: 1616632
Electronic Test Probes
|
$90.25
|
|
|
Fluke TL930
Catalog #: 1616671
Patch Cords
|
$90.25
|
|
|
Fluke TL932
Catalog #: 1616680
Patch Cords 90 cm
|
$90.25
|
|
|
Fluke TL935
Catalog #: 1616698
Patch Cord Kit
|
$90.25
|
|
|
Fluke TL940
Catalog #: 1616705
Mini-Hook Test Leads
|
$90.25
|
|
|
Fluke TL950
Catalog #: 1616710
Mini-Pincer Test Leads
|
$90.25
|
|
|
Fluke TL960
Catalog #: 1616722
Micro-Hook Test Leads
|
$90.25
|
|
|
Fluke TL970
Catalog #: 1616793
Hook and Pincer Set
|
$129.24
|
|
|
Fluke TP220
Catalog #: 1670056
SureGrip Industrial Test Probes
|
$60.24
|
|
|
Fluke TP74
Catalog #: 1541649
Lantern Tip Test Probes
|
$60.24
|
|
|
Fluke TP912
Catalog #: 1616644
Replacement Tips for TL910
|
$75.24
|
|
|
Fluke TP920
Catalog #: 1616659
Test Probe Adapter Set
|
$75.24
|
|
|
Fluke TPAK
Catalog #: 1281997
Meter Hanging Kit
|
$75.25
|
Cases
| Product |
Price |
|
|
Fluke C100
Catalog #: 827055
Universal Carrying Case
|
$80.24
|
|
|
Fluke C115
Catalog #: 2826063
Soft Carrying Case
|
$70.25
|
|
|
Fluke C125
Catalog #: 646858
Compact Soft Case
|
$60.24
|
|
|
Fluke C25
Catalog #: 681114
Large Soft Case for DMMs
|
$2.00
|
|
|
Fluke C345
Catalog #: 3311173
Soft Carrying Case
|
$126.24
|
|
|
Fluke C550
Catalog #: 1547919
Tool Bag
|
$145.24
|
Current Clamps
| Product |
Price |
|
|
Fluke I1010
Catalog #: 617735
AC/DC Clamp-on Current Probe 600A/1000A
|
$534.24
|
|
|
Fluke I200
Catalog #: 664755
Current Probe
|
$219.24
|
|
|
Fluke I400
Catalog #: 2277225
Current Clamp Adaptor
|
$199.24
|
|
|
Fluke I410
Catalog #: 617727
AC/DC Current Clamp Adaptor
|
$329.24
|
DMM Probe Kits
| Product |
Price |
|
|
Fluke TL220
Catalog #: 2003625
Industrial Test Lead Set
|
$110.24
|
|
|
Fluke TL238
Catalog #: 2132831
SureGrip Test Lead Set
|
$114.24
|
|
|
Fluke TL81A
Catalog #: 1277073
Deluxe Electronic Test Lead Kit
|
$216.24
|
|
|
Fluke TLK-220
Catalog #: 2097010
Industrial Test Lead Kit
|
$218.24
|
|
|
Fluke TLK289
Catalog #: 3045646
Industrial Master Test Lead Set
|
$239.25
|
Temp. Probes
| Product |
Price |
|
|
Fluke 80BK-A
Catalog #: 2747801
Integrated DMM Temperature Probe
|
$80.24
|
|
|
Fluke 80PK-22
Catalog #: 2098684
SureGrip Immersion Temperature Probe
|
$150.25
|
|
|
Fluke 80PK-8
Catalog #: 200360
Pipe Clamp Temperature Probe
|
$239.24
|
|
|
|