|
|
|
|
Fluke 6200-2
Portable Appliance Testers
Product Highlights
Fluke Simplifies Portable Appliance Testing
- Dedicated key for each test for ‘one-touch’ testing
- Pre-set pass/fail levels to save time
- Large backlit display for easy reading
- Single mains socket for appliance connection
- Separate IEC socket for easy mains/extension lead testing
- Detachable test leads for quick field replacement
- Integral carrying handle
- USB port for data transfer
Each Unit Includes
- Fluke 6200-2 Portable Appliance Tester
- User's manual on CD
- Quick reference guide
- Hard carrying case
- Test lead
- Test probe
- Crocodile clip
- Mains cord
- ISO 9001 - Statement of Calibration Practices
| Specifications |
| Test specifications |
The accuracy specification for the display range is defined as ±(%reading + digit counts) at 23 °C ±5 °C, ≤75% RH. |
| Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy specifications may degrade by 0.1 x (accuracy specification) per °C. |
| The measurement range meets the service operating errors specified in EN61557-1: 1997, EN61557-2: 1997, EN61557-4: 1997, EN61557-6: 1997, DIN VDE0404-2. |
| Power-on test |
The test indicates reversed L-N, missing PE, and measures the mains voltage and frequency. |
| Display range |
90 V to 264 V |
| Accuracy at 50 Hz |
±(2% + 3 counts) |
| Resolution |
1 V |
| Input impedance |
> 1 MΩ // 2.2 nF |
| Maximum input mains voltage |
264 V |
| Earth bond test (R pe) |
Display Range |
0 to 19.99 Ω |
| Accuracy (after bond test zeroing) |
±(2.5% + 4 counts) |
| Resolution |
0.01 Ω |
| Test current |
200 mA AC -0% +40% into 1.99 Ω
25 A AC ±20% into 25 mΩ at 230 V |
| Open circuit voltage |
> 4 V AC, < 24 V AC |
| Bond test zeroing |
can subtract up to 1.99 Ω |
| Insulation test (R iso) |
Display range |
0 to 299 MΩ |
| Accuracy |
±(5% + 2 counts) from 0.1 to 300 MΩ |
| Resolution |
0.01 MΩ (0 to 19.99 MΩ)
0.1 MΩ (20 to 199.9 MΩ)
1 MΩ (200 to 299 MΩ) |
| Test voltage |
500 V DC -0% + 10% at 500 kΩ load |
| Test current |
> 1 mA at 500 kΩ load, < 15 mA at 0 Ω |
| Auto discharge time |
< 0.5 s for 1 μF |
| Max. capacitive load |
Operational up to 1 μF |
| Touch current test |
Display range |
0 to 1.99 mA AC |
| Accuracy |
±(4% + 2 counts) |
| Resolution |
0.01 mA |
| Internal resistance (via probe) |
2 kΩ |
| Measuring method |
Probe* |
| Substitute leakage current test |
Display range |
0 to 19.99 mA AC |
| Accuracy |
±(2.5% + 3 counts) |
| Resolution |
0.01 mA |
| Test Voltage |
100 V AC ±20% |
| Load/leakage test: load current |
Display range |
0 A to 13 A |
| Accuracy |
±(4% + 2 counts) |
| Resolution |
0.1 A* |
| Load/leakage test: load power |
Display range 230 V Mains |
0.0 VA to 3.2 kVA |
| Accuracy |
±(5% + 3 counts) |
| Resolution |
1 VA (0 to 999 VA), 0.1 kVA (>1.0 kVA)* |
| Load/leakage test: leakage current |
Display range |
0 to 19.99 mA |
| Accuracy |
±(4% + 4 counts) |
| Resolution |
0.01 mA* |
| PELV test |
Accuracy at 50 Hz |
±(2% + 3 counts) |
| Overload protection |
300 V rms |
| Warning threshold |
25 V rms |
| *The appliance under test is energized at mains potential. |
| Environmental specifications |
| Operating temperature |
0 to 40 °C |
| Relative humidity |
Non condensing <10 °C |
| 95% from 10 to 30 °C |
| 75% from 30 to 40 °C |
| Safety specifications |
| Safety rating |
Complies with EN61010-1 3rd edition |
| CAT II, 300 V, pol 2 |
| Mechanical and general specifications |
| Size (L x W x H) |
200 x 275 x 114 mm |
| Weight |
3.13 kg |
| Power supply |
230 V +10% -15%, 50 Hz ±2 |
| Power consumption (tester) |
13 W typical (idle)
60 W max. during 25A Bond test |
| Storage |
Temperature |
-10 to 60 °C |
| Corrosion |
70 °C @ 95% RH for 5 days max. |
| Operating altitude |
0 up to 2000 m |
| Sealing |
IP-40 (enclosure), IP-20 (connectors) |
| EMC |
Complies with EN61326-1, portable |
| EMI Immunity |
3 V/m |
|
|
|
|