Tel.
888 315.6773
Email:
sales@usamultimeters.com
WhatsApp: +1619 569-1640
Products
Manufacturers
Quote Request
Resources
Cart(0)
Our search by product feature is currently under construction. Please search by manufacturer or using the site search bar. We apologize for the inconvenience. Should you have any questions please feel free to contact us at sales@usamultimeters.com or by calling 888-315-6773
Home >> Fluke >> Fluke Multifunction Calibrators >> Fluke 754/154 BU
Fluke 754/154 BU
Catalog #: 4816043
754 Process Calibrator and 154 HART Calibration Assistant Bundle w/ Rugged Case

  • Overview
  • Specifications
  • Summary
  • Temp. Probes
  • Pressure Modules
  • Cases
  • Calibration Pumps
  • Shunts
  • Software
  • Accessories

Product Highlights

Fluke 754 Documenting Process Calibrator-HART

  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Easy to use
  • Three year warranty
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
  • Delivered with DPC/Track Sample software
  • Compatible with many Asset Management software packages

FLUKE 154 HART CALIBRATION ASSISTANT

  • 154 HART Calibration Assistant
  • Full HART Device Description (DD) support of all HART devices
  • Configure HART devices 
  • Perform HART trim on HART devices when used with a Fluke 750, or 720 series calibrator 
  • Monitor device PV, SV, TV, QV and other measured HART variables
  • Quarterly HART DD updates for free 
  • Convenient wireless connectivity to HART modem
  • Easy to use, fast connect and view HART data
  • Store HART device configurations
  • Long range wireless communication up to 250 feet

Each Unit Includes

  • 3x Stackable Test Lead Sets
  • 3x Test probes Sets (TP220)
  • 3x Extended Tooth Alligator Clip Sets
  • 2x Hook Clip Sets (AC280)
  • Li-ion Battery Pack (BP7240)
  • Battery Charger (BC7240)
  • Rugged Carrying Case
  • USB Communications Cable
  • Getting Started Guide
  • Instruction Manual (CD)
  • NIST Certificate of Calibration
  • DPC/Track 2 Sample Software
  • HART Communications Cable
  •  
  • Catalog #: 4805616 
  • Fluke 154 US/CAN Multifunction Calibrators - Type: Hand Held, Hart Compatible: Yes, FieldBus Compatible: No
  • Each Unit Inlcudes:
  • Wireless HART Modem
  • Tablet Fluke HART App installed
  • Tablet charger
  • USB micro cable
  • USB mini cable
  • Hook test clips
  • Alligator clips
  • Magnetic hanging strap
  • Case
  • Proof of purchase for product activation
  • Manual installed on tablet
  •  

 

Fluke 754 General Specifications
Measurement Accuracy
Voltage DC
100.000 mV
3.00000 V
30.0000 V
300.00 V		 1 Year
0.02%+0.005 mV
0.02%+0.00005 V
0.02%+0.0005 V
0.05%+0.05 V		 2 Years
0.03%+0.005 mV
0.03%+0.00005 V
0.03%+0.0005 V
0.07%+0.05 V
Voltage AC Range 40 to 500 Hz
3.000 V
30.00 V
300.0 V		 Resolution
0.001 V
0.01 V
0.1 V		 1 Year
0.5%+0.002 V
0.5%+0.02 V
0.5%+0.2 V		 2 Years
1.0%+0.004 V
1.0%+0.04 V
1.0%+0.2 V
Current DC
30.000 mA
110.00 mA		 1 Year
0.01% + 5 uA
0.01% + 20 uA		 2 Years
0.015%+7 uA
0.015%+30 uA
Resistance
10.000 Ω
100.00 Ω
1.0000 Ω
10.000 Ω		 1 Year
0.05% + 50 mΩ
0.05% + 50 mΩ
0.05% + 500 mΩ
0.1% + 10 Ω		 2 Years
0.07%+70 mΩ
0.07%+70 mΩ
0.07%+0.5 Ω
0.15%+15 Ω
Frequency
1.00 to 110.00 Hz
110.1 to 1100.0 Hz
1.101 to 11.000 kHz
11.01 to 50.00 kHz		 Resolution
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz		 Accuracy (2 Years)
0.05 Hz
0.5 Hz
0.005 kHz
0.05 kHz
Source Accuracy
Voltage DC
100.000 mV
1.00000 V
15.0000 V		 1 Year
0.01%+0.005 mV
0.01%+0.00005 V
0.01%+0.0005 V		 2 Years
0.015%+0.005 mV
0.015%+0.0005 V
0.015%+0.0005 V
Current DC
22.000 mA (Source)
Current Sink (Simulate)		 1 Year
0.01%+ 0.003 mA
0.02% + 0.007 mA		 2 Years
0.02%+ 0.003 mA
0.04% + 0.007 mA
Resistance
10.000 Ω
100.00 Ω
1.0000 Ω
10.000 Ω		 1 Year
0.01% + 10 mΩ
0.01% + 20 mΩ
0.02% + 0.2 Ω
0.02% + 3 Ω		 2 Years
0.015% + 15 mΩ
0.015% + 30 mΩ
0.03% + 0.3 Ω
0.03% + 5 Ω
Frequency
0.1 to 10.99 Hz
0.01 to 10.99 Hz
11.00 to 109.99 Hz
110.0 to 1099.9 Hz
1.100 to 21.999 kHz
22.000 to 50.000 kHz		 2 Years
0.01 Hz
0.01 Hz
0.1 Hz
0.1 Hz
0.002 kHz
0.005 kHz
Technical Data
Data Log Functions
Measure functions Voltage, current, resistance, frequency, temperature, pressure
Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute
Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute)
Ramp Functions
Source functions: Voltage, current, resistance, frequency, temperature
Rate: 4 steps/second
Trip detect: Continuity or voltage (continuity detection not available when sourcing current)
Loop Power Function
Voltage: Selectable, 26 V
Accuracy: 10%, 18 V minimum at 22 mA
Maximum current: 25 mA, short circuit protected
Maximum input voltage: 50 V DC
Step Functions
Source Functions Voltage, current, resistance, frequency, temperature
Manual Step Selectable step, change with arrow buttons
Autostep Fully programmable for function, start delay, stepvalue, time per step, repeat
Environmental Specifications
Operating Temperature -10 °C to +50 °C
Storage Temperature -20 °C to +60 °C
Dust/water resistance Meets IP52, IEC 529
Operating Altitude 3000 m above mean sea level (9842 ft)
Safety Specifications
Agency Approvals CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
Mechanical & General Specifications
Size  136 x 245 x 63 mm (5.4“ x 9.6 x 2.5)
Weight 1.2 kg (2.7 lb)
Batteries Internal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh
Battery Life >8 hours typical
Battery Replacement Via snap-shut door without opening calibrator; no tools required
Side port connections Pressure module connector
USB Connector to interface to your PC
Connection for optional battery charger/eliminator
Data storage capacity 1 week of calibration procedures results
90 day specifications The standard specification interval for the 750 Series are 1 and 2 years
Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "%of output" specifications by 2
Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant.

 

Fluke 154 Specification
Tablet
Operating system Android 5.0 or newer
Processor ARM or Atom
Memory RAM 1 GB
Memory ROM 2GB
Screen 960x540 qHD
Communication port Bluetooth
HART Modem
Enclosure
Material High strength ABS Plastic
Dimensions (LxWxH) 10.16 cm x 2.5 cm x 6.9 cm (4 in x 1 in x 2.75 in)
Total unit weight .16 kg (0.36 lb)
Cables
HART cable length 4 ft (1.2 m)
HART cable connectors Mini-Grabber
HART Interface
Interface Capacitive coupling
Output 600 mVpp
Leakage < 10 uA
Connections Across loop resistor or HART field device
Specifications HART 4, HART 5, HART 6, HART 7
HART physical layer spec HCF_SPEC-54
Wireless Interface
Specification Bluetooth v2.0
Frequency 2.4 GHz
Class 1 master distance 275 ft (83.8 m)
Battery
Type Rechargeable Li-Ion
Life 19 hours continuous use
Environmental
Operating temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage temperature -10 °C to 45 °C (-14 °F to 113 °F)
Humidity 0 % to 90 % (non-condensing)

 

Process / Calibration/Multifunction Calibrators Template
Type Hand Held
Measure Voltage Yes
Loop Voltage Min 0.005 mV (0.000005 V)
Simulate Loop Voltage Yes
Loop Voltage Max 26 V
Voltage Measurement Max 300 V
Voltage Measurement Min 0.005 mV (0.000005 V)
Source/Simulate DC Current Yes
Measure DC Current Yes
Current Measurement Max 110 mA
Current Measurement Min 5 uA (0.005 mA)
Source/Simulate Resistance Yes
Measure Resistance Yes
Resistance Measurement Max 10 K Ohms (10000 Ohms)
Resistance Measurement Min 50 M Ohms (50000000 Ohms)
Source/Simulate Frequency Yes
Measure Frequency Yes
Frequency Measurement Max 50 kHz (50000 Hz)
Frequency Measurement Min 0.01 Hz
Measure RTD Yes
Measure Thermocouples Yes
Source/Simulate Pressure No
Pressure Modules Available Yes
Hart Compatible Yes
FieldBus Compatible No
Data Log Functions Current, Frequency, Resistance, Temperature, Voltage
Backlighted Yes
Graphical Screen No
Types RTD/Thermocouples Accepted B, C , E, J, K, L, N, R, S, T, U 
Intrinsically Safe(Calibrators) No
Data Logging  Yes
Unique Features Holds up to a full week of downloaded procedures and calibration results. Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc. Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
Warranty 3 YEARS
Calibration Included NIST Calibration
Power Supply Voltage Battery Powered
Safety Approval CSA
IP Rating  IP52
Product Weight 2.7 LBS
Battery Type Li-ion
Product Height 7.87 IN
Product Length 16.14 IN
Product Width 11.02 IN
Shipping Weight 11.2 LBS
ECCN Number 3A992
Country of Origin United States
Shipping Height 7.87 IN
Shipping Length 16.14 IN
Shipping Width 11.02 IN
MEMBER PRICE: INACTIVE
List price:   $13,208.24
Notify me when price changes $

Related products

Temp. Probes

Pressure Modules

Cases

Calibration Pumps

Shunts

Software

Accessories

Recently viewed products

  • Fluke 754/154 BU
    Catalog #: 4816043 754 Process Calibrator and 154 HART Calibration Assistant Bundle w/ Rugged Case
    $13,208.24
We Ship Worldwide
Australia
Write us quote request in any language and then immediately translate it to English on our site.
Brazil
Envíenos su solicitud en cualquier idioma, que luego se traducen automáticamente en Inglés en nuestro sitio web.
Chile
Envíenos su solicitud en cualquier idioma, que luego se traducen automáticamente en Inglés en nuestro sitio web.
China
您的要求发送给我们以任何语言，它会自动翻译成英文在我们的网站。
France
Envoyez-nous votre demande dans n'importe quelle langue, qui seront ensuite automatiquement traduites en anglais sur notre site.
Germany
Schreiben Sie uns Ihre Anfrage in jeder beliebigen Sprache, diese wird dann auf unserer Website automatisch ins englische übersetzt.
India
हमें किसी भी भाषा में आपके अनुरोध है, जो स्वचालित रूप से हमारी वेबसाइट पर अंग्रेजी में अनुवाद हो जाएगा भेजें.
Italy
Inviaci la tua richiesta in qualsiasi lingua, che sarà automaticamente tradotto in inglese sul nostro sito web.
Japan
任意の言語で、その後は自動的に英語に当社のウェブサイト上に翻訳されますあなたのリクエストを送ってください。
Mexico
Envíenos su solicitud en cualquier idioma, que luego se traducen automáticamente en Inglés en nuestro sitio web.
Norway
Send oss din forespørsel på alle språk, som deretter automatisk oversatt til engelsk på våre nettsider.
Philippines
Ipadala sa amin ang inyong kahilingan sa kahit anong wika, na awtomatikong masasalin sa Ingles sa aming website.
Portugal
Envíenos su solicitud en cualquier idioma, que luego se traducen automáticamente en Inglés en nuestro sitio web.
Russian Federation
Отправьте нам свой запрос на любом языке, который будет автоматически переведен на английский на нашем сайте.
Spain
Envíenos su solicitud en cualquier idioma, que luego se traducen automáticamente en Inglés en nuestro sitio web.
United Kingdom
Write us quote request in any language and then immediately translate it to English on our site.
Quote Request
Portuguese Spanish German Hindi Italian Russian
English
Write us quote request in any language and then immediately translate it to English on our site
We Accept Payments
Usamultimeters.com BBB Business Review
Copyright © 2008-2024 usamultimeters.com All Rights Reserved
Products Manufactures Quote Request Resources Cart