|
|
|
|
Fluke Calibration 5608-9-G
Catalog #: 3057141
Secondary Standard PRT with Calibration Option, 100 OHM (1/8 X 9 INCH), G = Gold Pins
- Overview
- Specifications
- Summary
- Cases
Product Highlights
- Golden pin connector tips
- Probe size: 9 in by 1/8 in
- 200 °C to 500 °C (80mm minimum immersion)
- +/- 0.01 short-term stability
- Calibration not included, NVLAP-accredited calibration optional, lab code 200348-0
- The 5608 comes with a one-eighth inch (3.18mm) diameter sheath in lengths of 9 inches
Each Unit Includes
- Coefficient Sheet
- User Manual CD
| Specifications |
| Temperature range |
5608: –200 °C to 500 °C |
5609: –200 °C to 670 °C |
| Nominal resistance at 0.01 °C |
100 Ω ± 0.5 Ω |
| Temperature coefficient |
0.0039250 Ω/Ω/°C |
| Relative Accuracy[1] |
± 0.007 °C at –200 °C
± 0.008 °C at 0 °C
± 0.020 °C at 420 °C
± 0.027 °C at 660 °C |
| Short-term repeatability[2] |
± 0.007 °C at 0.010 °C
± 0.013 °C at max temp |
| Drift[3] |
± 0.01 °C at 0.010 °C
± 0.02 °C at max temp |
| Hysteresis |
± 0.01 °C maximum |
| Sensor length |
30 mm ± 5 mm (1.2 in ± 0.2 in) |
| Sensor location |
3 mm ± 1 mm from tip (0.1 in ± 0.1 in) |
| Sheath material |
Inconel™ 600 |
| Minimum insulation resistance |
5608: 500 MΩ at 23 °C, 20 MΩ at 500 °C
5609: 500 MΩ at 23 °C, 10 MΩ at 670 °C |
| Transition junction temperature range[4] |
–50 °C to 200 °C |
| Transition junction dimensions |
71 mm x 12.5 mm (2.8 in x 0.49 in) |
|
Minimum immersion length[5] (<5 mK error)
|
5608: 80 mm (3.1 in)
5609: 100 mm (3.9 in) |
| Maximum immersion length |
305 mm (12 in) |
| Response time[5] |
5608: 9 seconds typical
5609: 12 seconds typical |
| Self heating (in 0 °C bath) |
5608: 75 mW/°C
5609: 50 mW/°C |
| Lead-wire cable type |
PTFE 24 AWG |
| Lead-wire length |
1.8 m (6 ft) |
| Lead-wire temperature range |
–50 °C to 250 °C |
| Calibration |
Calibration not included; NVLAP-accredited calibration optional, lab code 200348-0. Please see calibration uncertainty table and its explanation of changeable uncertainties.
|
[1] Includes short-term repeatability and 100 hr drift. Calibration will add additional uncertainties.
[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2)
[3] After 100 hours at max temp, 95 % confidence (k=2)
[4] Temperatures outside this range will cause irreparable damage. For best performance, transition junction should not be too hot to touch.
[5] Per ASTM E 644 |
| Calibration Uncertainty for optional NVLAP-accredited† calibration |
| Temperature |
Expanded Uncertainty (k=2) |
| –200 °C |
0.025 °C |
| –100 °C |
0.025 °C |
| –40 °C |
0.025 °C |
| 0 °C |
0.025 °C |
| 156 °C |
0.025 °C |
| 230 °C |
0.030 °C |
| 420 °C |
0.045 °C |
| 660 °C |
0.050 °C |
| Note: Calibration uncertainties depend on the uncertainties of the lab performing the calibration. Subsequent calibrations of this probe performed with different processes, at different facilities, or with changed uncertainty statements may state different uncertainties. †Lab code 200348-0 |
|
| Fluke Calibration Platinum Resistance Thermometers (PRTs) |
| Model |
Range |
Size |
Basic Accuracy† |
| Platinum Resistance Thermometer: Secondary Standard PRT |
| 5608-9-X |
–200 to 500 °C |
9 in x 1/8 in |
Select from available calibration options |
| 5608-12-X |
–200 to 500 °C |
12 in x 1/8 in |
| 5609-12-X |
–200 to 670 °C |
12 in x 1/4 in |
| 5609-15-X |
–200 to 670 °C |
15 in x 1/4 in |
| 5609-20-X |
–200 to 670 °C |
20 in x 1/4 in |
| 5609-300-X |
–200 to 670 °C |
300 mm x 6 mm |
| 5609-400-X |
–200 to 670 °C |
400 mm x 6 mm |
| 5609-500-X |
–200 to 670 °C |
500 mm x 6 mm |
| 5626 |
–200 °C to 661 °C |
305 or 381 x 6.35 mm (12 or 15 x 0.25 in |
±0.007 °C at 0 °C |
| Platinum Resistance Thermometer: Secondary Reference PRT |
| 5616-12 |
–200 °C to 420 °C |
6.35 mm x 298 mm (0.250 x 11.75 in) |
± 0.010 °C at 0.010 °C |
| 5615-6 |
–200 to 300 °C |
4.76 mm x 152 mm (0.188 x 6.0 in) |
± 0.013 °C at 0.010 °C |
| 5615-9 |
–200 °C to 420 °C |
4.76 mm x 229 mm (0.188 x 9.0 in) |
± 0.013 °C at 0.010 °C |
| >5615-12 |
–200 °C to 420 °C |
6.35 mm x 305 mm (0.250 x 12.0 in) |
± 0.013 °C at 0.010 °C |
| Platinum Resistance Thermometer: Precision Industrial PRT |
| 5627A-6 |
–200 °C to 300 °C |
152 x 4.7 mm (6 x 0.187 in) |
±0.05 °C at 0 °C |
| 5627A-9 |
–200 °C to 300 °C |
229 x 4.7 mm (9 x 0.187 in) |
±0.05 °C at 0 °C |
| 5627A-12 |
–200 °C to 420 °C |
305 x 6.35 mm (12 x 0.25 in) |
±0.05 °C at 0 °C |
| Platinum Resistance Thermometer: Fast Response PRT |
| >5622-05 |
–200 °C to 350 °C |
100 x 0.5 mm |
±0.04 °C at 0 °C |
| >5622-10 |
–200 °C to 350 °C |
100 x 1.0 mm |
±0.04 °C at 0 °C |
| >5622-16 |
–200 °C to 350 °C |
200 x 1.6 mm |
±0.04 °C at 0 °C |
| >5622-32 |
–200 °C to 350 °C |
200 x 3.2 mm |
±0.04 °C at 0 °C |
| Platinum Resistance Thermometer: Small Diameter Industrial PRTs |
| 5618B-6 |
–200 °C to 300 °C |
152 x 3.2 mm (6 x 0.125 in) |
±0.05 °C |
| 5618B-9 |
–200 °C to 500 °C |
229 x 3.2 mm (9 x 0.125 in) |
±0.05 °C |
| 5618B-12 |
–200 °C to 500 °C |
305 x 3.2 mm (12 x 0.125 in) |
±0.05 °C |
| Platinum Resistance Thermometer: Full Immersion PRTs |
| 5606 Immersion PRT |
–200 to 160 °C |
50 x 3.1 mm ( 2 x 1/8 in) |
±0.05 °C |
| 5607 Immersion PRT |
0 to 450 °C |
75 x 3.1 mm (3 x 1/8 in) |
±0.055 °C |
| 5623B Freezer Probe |
–100 °C to 156 °C |
152 x 6.35 mm (6 x 0.25 in) |
±0.05 °C |
| Thermistors |
| Thermistor: Standards |
| 5640 |
0 °C to 60 °C |
229 x 6.35 mm (9 x 0.25 in) |
±0.0015 °C |
| 5641 |
0 °C to 60 °C |
114 x 3.2 mm (4.5 x 0.125 in) |
±0.001 °C |
| 5642 |
0 °C to 60 °C |
229 x 3.2 mm (9 x 0.125 in) |
±0.001 °C |
| 5643 |
0 °C to 100 °C |
114 x 3.2 mm (4.5 x 0.125 in) |
±0.0025 °C |
| 5644 |
0 °C to 100 °C |
229 x 3.2 mm (9 x 0.125 in) |
±0.0025 °C |
| Thermistor: Secondary Probes |
| 5610 |
0 °C to 100 °C |
152 or 229 x 3.2 mm (6 or 9 x 0.125 in) |
±0.01 °C |
| 5611A |
0 °C to 100 °C |
1.5 mm (0.06 in) tip dia. |
±0.01 °C |
| 5611T |
0 °C to 100 °C |
28 x 3 mm (1.1 x 0.12 in) |
±0.01 °C |
†“Basic Accuracy” includes calibration uncertainty and short-term repeatability. It does not include long-term drift.
X = termination. Specify A (INFO-CON for 914X), B (bare wire), D (5-pin DIN for Tweener Thermometers), G (gold pins), I (INFO-CON for 1521 or 1522), J (banana plugs), L (mini spade lugs), M (mini banana plugs), P (INFO-CON for 1523 or 1524), or S (spade lugs). |
|
|
|
|