|
|
|
|
Fluke 3540 FC KIT
Catalog #: 4948724
3-Phase Power Monitor
- Overview
- Specifications
- Summary
- Current Clamps
- Accessories
Product Highlights
- THREE-PHASE MONITORING AND STREAMING
- Monitor three-phase systems and stream data to the Fluke Connect Cloud
- CONNECTED
- The measurement data from the Fluke Connect Cloud is available on any connected device using the Fluke Connect mobile app or Fluke Connect Condition Monitoring software
- EASY-TO-INSTALL AND MOVE
- Powered from the measurement circuit, configuration checker can automatically correct connection errors
- ALWAYS ON
- The Monitor includes a mode to log measurements when no connection to the Fluke Connect Cloud is available
Each Unit Includes
- Power supply
- Voltage test leads
- (4x) Dolphin clips
- (3x) 1500A flexible current probe
- Magnetic hanging kit
- WiFi to USB adapter
- Color coding set
| General Specifications |
| Color LCD display |
4.3-inch active matrix color TFT, 480 pixels x 272 pixels, resistive touch panel |
| Warranty |
3540 FC and built-in power supply |
2 years (battery not included) |
| Accessories |
1 year |
| Calibration cycle |
2 years |
Dimensions
(W x H x D) |
3540 FC |
19.8 cm x 16.7 cm x 5.5 cm (7.8 in x 6.6 in x 2.2 in) |
| Detachable power supply |
13.0 cm x 13.0 cm x 4.5 cm (5.1 in x 5.1 in x 1.8 in) |
| 3540 FC with power supply attached |
19.8 cm x 16.7 cm x 9 cm (7.8 in x 6.6 in x 4.0 in) |
| Weight |
3540 FC |
1.1kg (2.5 lb) |
| Power Supply |
400 g (0.9 lb) |
| Tamper protection |
Kensington lock |
| Environmental Specifications |
| Operating temperature |
<10 °C to +45 °C (+14 °F to +113 °F) |
| Storage temperature |
<20 °C to +60 °C (-4 °F to +140 °F), with battery: -20 °C to +50 °C (-4 °F to +122 °F) |
| Operating humidity |
<10 °C (<50 °F) non condensing |
| 10 °C to 30 °C (50 °F to 86 °F) ≤95 % |
| 30 °C to 40 °C (86 °F to 104 °F) ≤75 % |
| 40 °C to 45 °C (104 °F to 113 °F) ≤45 % |
| Operating altitude |
2000 m (6,500 ft) (up to 4,000 m derate to 1000 V CAT II/600 V CAT III/300 V CAT IV) |
| Storage altitude |
12,000 m (39,000 ft) |
| IP rating |
IEC 60529:IP50, in connected condition with protection caps in place |
| Vibration |
MIL-T-28800E, Type 3, Class III, Style B |
| Safety |
| IEC 61010-1 |
IEC mains input |
Overvoltage Category II, Pollution Degree 2 |
| Voltage terminals |
Overvoltage Category IV, Pollution Degree 2 |
| IEC 61010-2-033 |
CAT IV 600 V / CAT III 1000 V |
| Electromagnetic compatibility (EMC) |
| International |
IEC 61326-1: Industrial |
| Korea (KCC) |
Class A Equipment (Industrial Broadcasting & Communication Equipment) |
| USA (FCC) |
47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. |
| Wireless radio with adapter |
| Frequency range |
2412 MHz to 2462 MHz |
| Output power |
<100 mW |
| Electrical specifications |
| Power supply |
| Voltage range |
nominal 100 V to 500 V (85 V min to 550 V max) using safety plug input |
| Mains power |
nominal 100 V to 240 V (85 V min to 265 V max) using IEC 60320 C7 input |
| Power consumption |
Maximum 50 VA (max. 15 VA when powered using IEC 60320 input) |
| Standby Power |
<0.3 W only when powered using IEC 60320 input |
| Efficiency |
≥ 68.2 % (in accordance with energy efficiency regulations) |
| Mains frequency |
50/60 Hz ± 15 % |
| Battery power |
Li-ion 3.7 V, 9.25 Wh, customer-replaceable |
| On-battery runtime |
Up to 4 hr (up to 5.5 hr in energy saving mode) |
| Charging time |
<6 hr |
| Voltage inputs |
| Number of inputs |
4 (3 phases and neutral) |
| Maximum input voltage |
1000 Vrms (1700 Vpk) phase to neutral |
| Input impedance |
10 MΩ each phase to neutral |
| Bandwidth |
42.5 Hz to 3.5 kHz |
| Scaling |
1:1, variable |
| Current inputs |
| Number of inputs |
3, mode selected automatically for attached sensor |
| Current sensor output voltage |
Clamp |
500 mVrms / 50 mVrms; CF 2.8 |
| Rogowski coil |
150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4; all at nominal probe range |
| Bandwidth |
(-3 dB) 42.5 Hz to 3.5 kHz |
| Scaling |
1:1 and variable |
| Data acquisition |
| Resolution |
16-bit synchronous sampling |
| Sampling frequency |
10.24 kHz at 50/60Hz, synchronized to mains frequency |
| Input signal frequency |
50/60 Hz (42.5 to 69 Hz) |
| Wiring configurations |
1-Φ, 1-Φ IT, Split phase, 3-Φ wye, 3-Φ wye IT, 3-Φ wye balanced, 3-Φ delta, 3-Φ Aron/Blondel (2-element delta), 3-Φ delta open leg, 3-Φ high leg delta, 3-Φ delta balanced. Currents only (load studies) |
| Data storage |
Internal flash memory (not user replaceable) |
| Memory size |
Typical 1 offline logging section of 1 week with 1 second intervals. The number of possible logging sessions and logging period depends on user requirements. |
| Basic interval |
| Measured parameters |
Voltage, current, frequency, THD V, THD A, power, power factor, fundamental power, DPF |
| Averaging interval |
1 s |
| Total harmonic distortion |
THD for voltage and current is calculated on 25 harmonics |
| Averaging time min/max values |
| Voltage |
Full cycle RMS (20 ms at 50 Hz, 16.7 ms at 60 HZ) |
| Current |
Half cycle RMS (10 ms at 50 Hz, 8.3 ms at 60 Hz) |
| Power |
200 ms |
| Interfaces |
| USB-A |
Firmware updates, max. supply current: 120 mA |
| WiFi |
| Supported modes |
Direct connection and connection to infrastructure |
| Security |
WPA2-AES with pre-shared key |
| Power Measurement/Power Loggers Template |
| Input(power loggers) |
Single Phase, Three Phase |
| Type(Power loggers) |
Digital, Portable Hand Held |
| Maximum Current AC |
6000 A |
| Maximum Voltage AC |
1000 V |
| True RMS |
Yes |
| Current Input Channels |
1, 2, 3 |
| Voltage Input Channels |
1, 2, 3, 4 |
| Measurement Frequency |
40 Hz, 50 Hz, 60 Hz, 70 Hz |
| Display (Energy Management) |
Digital, Graphical |
| Displays Waveform |
Yes |
| Energy |
Yes |
| Power Factor (Power Quality) |
Yes |
| Total Harmonic Distortion |
Yes |
| Current Clamps Included |
Yes |
| CAT Rating |
III |
| CAT Voltage Rating (V) |
1000V, 600V |
| Warranty |
2 YEARS |
| Power Supply Voltage |
Battery Powered |
| Data Logging |
Yes |
| Interfaces I/O |
Wifi |
| Storage |
Internal Memory |
| Product Weight |
2.5 LBS |
| Battery Type |
Li-ion |
| ECCN Number |
3A992 |
| HTS/Schedule B Number |
9030390100 |
| Country of Origin |
Romania |
|
Current Clamps
| Product |
Price |
 |
Fluke I17XX-FLEX 6000/4PK
Catalog #: 4637430
iFlexi Current Clamp, 36 in. Circumference, 6000A, 4-Pack
|
$1,242.24
Sign In to See Exclusive Member Price
|
|
|
Fluke i17XX-FLEX1500
Catalog #: 4637328
1500A 12 inch iFlex Current Clamp
|
$279.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX1500/3PK
Catalog #: 4637337
1500A 12 inch, 3 pack iFlex Current Clamp
|
$782.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX1500/4PK
Catalog #: 4637411
iFlexi Current Clamp, 12 in. Circumference, 1500A, 4-Pack
|
$1,051.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX3000
Catalog #: 4637343
3000A 24 inch iFlex Current Clamp
|
$317.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX3000/3PK
Catalog #: 4637355
3000A 24 inch, 3 pack iFlex Current Clamp
|
$782.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX3000/4PK
Catalog #: 4637427
iFlexi Current Clamp, 24 in. Circumference, 3000A, 4-Pack
|
$1,051.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX6000
Catalog #: 4637362
6000A 36 inch iFlex Current Clamp
|
$317.24
Sign In to See Exclusive Member Price
|
|
|
Fluke I17XX-FLEX6000/3PK
Catalog #: 4637370
6000A 36 inch, 3 pack iFlex Current Clamp
|
$941.24
Sign In to See Exclusive Member Price
|
Accessories
|
|
|