| Technical specifications |
| Measurement function |
Alternating current |
| AC ampere range |
3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A |
| Range selection |
mA A: manual selection
3 mA, 30 mA, 300 mA: automatic selection
3 A, 30 A, 60 A: automatic selection |
| Range/Resolution |
3 mA [1] /0.001 mA
30 mA/0.01 mA
300 mA/0.1 mA
3 A/0.001 A
30 A/0.01 A
60 A/0.1 A |
Accuracy – filter activated (40 to 70 Hz),
filter off (40 to 1 kHz) [2] |
368/368 FC
3 mA – 30 A
60 A |
1 % + 5 digits
2 % + 5 digits |
Accuracy – filter activated (40 to 70 Hz),
filter off (40 to 1 kHz) [2] |
369/369 FC
3 mA to 30 A
60 A |
1.5 % + 5 digits
2 % + 5 digits |
| Frequency |
40 Hz to 1 kHz |
|
| Crest factor |
3 |
|
After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ± 5 °C and a
maximum relative humidity of 80 %.
[1] The minimum value is 10 µA rms. [2] Outside of the TC/°C 18 °C to 28 °C, 0.02 + 1 |
| Physical |
| Display (LCD) |
Digital readout: 3300 count |
| Display refresh rate |
4 times/sec |
| Maximum conductor diameter |
368/368 FC
369/369 FC |
40 mm
61 mm |
| Size (wxhxd) |
368/368 FC
369/369 FC |
101 mm x 234 mm x 46 mm
116 mm x 257 mm x 46 mm |
| Weight |
368/368 FC
369/369 FC |
500 g
600 g |
| Battery |
2 AA, IEC LR6, NEDA 15A, alkaline |
|
| Battery life |
Expected battery life, without using backlight and spotlight, is more than 150 hours |
| Automatic shut-down |
Meter automatically shuts down after 15 minutes of inactivity. |
| Safety and environmental specifications |
| General safety |
IEC 61010-1: Pollution Level 2 |
| Measurement safety |
IEC 61010-2-032: CAT III 600 V |
| Operating temperature |
-10 °C to +50 °C |
| Storage temperature |
-40 °C to +60 °C |
| Operating humidity |
Non-condensing (<10 °C)
90 % relative humidity (10 °C to 30 °C)
75 % relative humidity (30 °C to 40 °C)
45 % relative humidity (40 °C to 50 °C) |
| Protection class |
IEC 60529: IP30 (jaw closed) |
| Operating altitude |
2000 m |
| Storage altitude |
12000 m |
| Current sensor action category |
IEC 61557-13: Class 1, = 100 A/m |
| Electromagnetic compatibility (EMC) |
| International |
| IEC 61326-1 |
Industrial Electromagnetic Environment |
| CISPR 11 |
Group 1 Class B |
| Group 1 |
Generated inside the equipment and / or use radio frequency energy associated with
conducting the energy for the device's own internal functions is essential. |
| Class B |
Equipment for home appliances and residential buildings directly connected to a low
voltage power supply network equipment. When this device is connected to a test object,
it may exceed the emission levels produced by CISPR 11 requirements.
_________________________________________________________________________
Korea (KCC): A type of equipment (radio and communication equipment industry) |
| Class A |
This product meets the requirements of industrial electromagnetic equipment, vendors
or users should be aware of this. This device is intended for use in a commercial
environment, instead of the home environment.
_________________________________________________________________________
USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the
products are considered tax-free device. |