|
|
Amprobe ACDC-100 TRMS
Catalog #: 2740465
600V/800A AC/100A DC TRMS AC/DC Clamp Meter with Capacitance and Resistance
- Overview
- Specifications
- Summary
Product Highlights
- True-rms
- Measures AC current to 800A and DC current to 1000A, AC/DC voltage to 600V, plus capacitance, and resistance
- Continuity beeper quickly identifies shorts and opens
- Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
- Data hold freezes the reading on the display for further analysis
- Diode test quickly finds voltage drops
- MAX capture function measures inrush current (30 mS response)
- Combines user friendly features such as a large, easy to read backlit digital display, auto power-off to conserve battery life, and a "third hand" test probe holder
- Rubber over-molded case absorbs shock and provides built-in probe storage
- Accommodates conductors up to 2.0" (50mm) in diameter
- CAT III, 600V rated
Each Unit Includes
- 1 - Deluxe carrying case
- 1 - test leads
- 1 - batteries (installed)
- 1 - users manual
| General Specifications |
| Display |
3-3/4 digits 4000 counts LCD display |
| Update Rate |
3 per second nominal |
| Polarity |
Automatic |
| Low Battery |
Below approx. 2.4V |
| Operating Temperature |
0C to 40C |
| Relative Humidity |
Maximum relative humidity 80% for temperature up to 31C decreasing linearly to 50% relative humidity at 40C |
| Altitude |
Operating below 2000m |
| Storage Temperature |
-20C to 60C, < 80% R.H. (with battery removed) |
| Temperature Coefficient |
nominal 0.15 x (specified accuracy)/ C @(0C -18C or 28C -40C), or otherwise specified |
| Sensing |
True RMS |
| Safety |
Meets EN61010-1:2001; IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003) Category III 600 Volts AC & DC. |
| Transient protection |
6.5kV (1.2/50μs surge) for all models |
| Pollution degree |
2 |
| E.M.C. |
Meets EN61326-1 |
| Overload Protections |
| Clamp-on jaws |
DC 1000A or AC 800A rms continuous + & COM terminals (all functions) : 600VDC/VAC rms |
| Power Supply |
standard 1.5V AAA Size (NEDA 24G or IEC R03) battery X 2; or 1.5V AAA Size (NEDA 24A or IEC LR03) alkaline battery X 2 |
| Power Consumption |
typical 11mA for ACA/DCA and 2.9mA for other functions |
| APO Timing |
Idle for 30 minutes |
| APO Consumption |
typical 190μA |
| Dimension |
L227mm X W78mm X H40mm |
| Weight |
290 gm approx |
| Jaw opening & Conductor diameter |
50mm max |
| Function |
Range |
Accuracy |
| Electrical Specifications |
Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23? ± 5? & less than 75% R.H. |
| DC Voltage |
| |
400.0 mV |
0.3% + 3d |
| |
4.000V, 40.00V, 400.0V |
0.5% + 3d |
| |
600V |
1.0% + 4d |
| NMRR : |
>50dB @ 50/60Hz |
|
| CMRR : |
>120dB @ DC, 50/60Hz, Rs=1kΩ |
|
| Input Impedance : |
10MΩ, 30pF nominal (1000MΩ for 400.0mV range) |
|
| AC Voltage |
| 50Hz ~ 500Hz |
400.0mV 1) |
4.0% + 4d |
| 50Hz ~ 60Hz |
4.000V, 40.00V, 400.0V |
1.0% + 4d |
| 60Hz ~ 500Hz |
4.000V, 40.00V, 400.0V |
1.5% + 4d |
| 50Hz ~ 500Hz |
600V |
2.0% + 4d |
| CMRR : |
>60dB @ DC to 60Hz, Rs=1kΩ |
|
| Input Impedance: |
10MΩ, 30pF nominal |
|
| ACDC-100 TRMS Crest Factor: |
< 1.6 : 1 at full scale & < 3.2 : 1 at half scale |
|
| 1) Selection by RANGE button manually, and is specified AC 60mV and up |
| Resistance |
| |
400.0Ω |
0.8% + 6d |
| |
4.000kΩ, 40.00kΩ, 400.0kΩ |
0.6% + 4d |
| |
4.000MΩ |
1.0% + 4d |
| |
40.00MΩ |
2.0% + 4d |
| Open Circuit Voltage : |
0.4VDC typical |
|
| Audible Continuity Tester |
| Open Circuit Voltage: |
0.4VDC typical |
|
| Range: 400.0Ω; Accuracy: |
1.5% + 6d |
|
| Audible threshold: |
between 10Ω and 120Ω. |
|
| Diode Tester |
| Open Circuit Voltage |
Test Current (Typical) |
|
| < 1.6 VDC |
0.4mA |
|
| Capacitance |
| |
500.0nF, 5.000μF, 50.00μF,
500.0μF, 3000μF 1) |
3.5% + 6d2) 3) |
1) Additional 50.00nF range accuracy is not specified
2) Accuracies with film capacitor or better
3) Specified with battery voltage above 2.8V (approximately half full battery). Accuracy decreases gradually to 12% at low battery
warning voltage of approximately 2.4V |
| DC Current (Clamp-on) |
| 400.0A |
0.0A ~ 400.0A |
1.5% + 4d 1) 2) |
| 1000A |
400A ~ 800A |
1.5% + 4d 1) 2) |
| |
800A ~ 900A |
2.0% + 4d 1) 2) |
| |
900A ~ 1000A |
5.0% + 30d 1) 2) |
1) Induced error from adjacent current-carrying conductor: < 0.01A/A
2) Δ Zero mode must be applied to zero the unit before measurement to ensure accuracy. This is particularly important below 20A. |
| AC Current (Clamp-on) |
| 400.0A |
|
|
| |
15Hz ~ 40Hz |
2.0% + 5d 1) 2) 3) |
| |
40Hz ~ 200Hz |
1.5% + 5d 1) 2) |
| |
200Hz ~ 400Hz @ <50A 4) |
1.5% + 5d 1) 2) |
| |
400Hz ~ 1kHz @ <50A 4) |
2.0% + 5d 1) 2) |
| 800A |
|
|
| |
15Hz ~ 40Hz @ 400A ~ 600A |
2.0% + 5d 1) 2) 3) |
| |
40Hz ~ 100Hz @ 400A ~ 600A |
1.5% + 4d 1) 2) |
| |
15Hz ~ 60Hz @ 600A ~ 800A |
5.0% + 30d 1) 2) |
1) Induced error from adjacent current-carrying conductor: < 0.01A/A
2) ACDC-100 TRMS crest Factor: < 1.6 : 1 at full scale & < 3.2 : 1 at half scale
3) 4.0% + 5d for ACDC-100 TRMS
4) Accuracy is specified at <50A in this frequency bandwidth due to limited calibrator output capability for testing |
| Clamp Meters/Clamp Meters Template |
| Type |
Standard Style |
| True RMS |
Yes |
| Maximum Current AC |
800 A |
| Minimum Current AC |
0.1 A (100 mA) |
| Maximum Current DC |
1000 A |
| Minimum Current DC |
0 A (0 mA) |
| Maximum Voltage AC |
600 V |
| Minimum Voltage AC |
0.1 mV |
| Maximum Voltage DC |
600 V |
| Minimum Voltage DC |
0.1 mV |
| Basic Voltage Accuracy |
ACV: ± 2% Rdg + 4D; DCV: ± 1% Rdg + 4D |
| Digits Display |
3.75 |
| Counts |
4000 . |
| Resolution AC Volts |
0.1 mV (0.0001 V) |
| Resolution DC Volts |
0.1 mV (0.0001 V) |
| Resolution AC Current |
0.1 A |
| Resolution DC Current |
0 A |
| Maximum Conductor Size |
2 IN |
| Auto Ranging/Manual |
Both |
| Auto Power Off |
Yes |
| Detachable Jaw |
No |
| Rotating Jaw / Swivel |
No |
| Peak Hold |
No |
| Min/Max |
No |
| In-Rush Current |
Yes |
| Dual Display |
No |
| Analog Bargraph on Display |
No |
| Backlight |
Yes |
| Remote Display |
No |
| Resistance |
Yes |
| Frequency |
No |
| Continuity |
Yes |
| Capacitance |
Yes |
| Temperature (K T/C) |
No |
| Temperature (IR Sensor) |
No |
| Diode Testing |
Yes |
| CAT Rating |
III |
| Overload Protector |
Yes |
| True Power (KW) |
No |
| Apparent Power (VA) |
No |
| Power Factor (PF) |
No |
| Crest Factor |
Yes |
| Energy (KWh) |
No |
| Reactive Power (KVAR) |
No |
| Source/Simulate (Process Clamp) |
No |
| Unique Features |
Relative Zero Mode, Third Hand Test Probe Holder |
| Warranty |
1 YEARS |
| Warranty Details |
1 Year from the Date of Purchase, This Warranty Does Not Cover Fuses, Disposable Batteries or Damage from Accident, Neglect, Misuse, Alteration, Contamination or Abnormal Conditions of Operation or Handling |
| Additional Info/Comments |
Line splitter (Energizer), 3000A AC Flexible Clamp-on Attachment, Single Input Thermocouple Temperature Attachment, Test Lead Kit |
| Product Weight |
290 GRAMS (0.639 LBS) |
| Product Height |
40 MM (1.57 IN) |
| Product Length |
227 MM (8.94 IN) |
| Product Width |
78 MM (3.07 IN) |
| Data Logging |
No |
| Calibration Included |
Factory Calibration |
| Battery Type |
AAA |
| Power Supply Voltage |
Battery Powered |
| Country of Origin |
Taiwan |
| Shipping Height |
3.50 IN |
| Shipping Length |
12.00 IN |
| Shipping Width |
7.25 IN |
| Other Information |
Display: 3-3/4 digits 4000 counts LCD display
Update Rate: 3 per second nominal
Polarity: Automatic
Low Battery: Below approx. 2.4V
Operating Temperature: 0C to 40C
Relative Humidity: Maximum relative humidity 80% for temperature up to 31C decreasing linearly to 50% relative humidity at 40C
Altitude: Operating below 2000m
Storage Temperature: -20C to 60C, 80% R.H. (with battery removed)
Temperature Coefficient: nominal 0.15 x (specified accuracy)/ C @(0C -18C or 28C -40C), or otherwise specified
Sensing: True RMS
Safety: Meets EN61010-1:2001; IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003) Category III 600 Volts AC & DC.
Transient protection: 6.5kV (1.2/50µs surge) for all models
Pollution degree: 2
E.M.C.: Meets EN61326-1
Clamp-on jaws: DC 1000A or AC 800A rms continuous + & COM terminals (all functions) : 600VDC/VAC rms
Power Supply: standard 1.5V AAA Size (NEDA 24G or IEC R03) battery X 2; or 1.5V AAA Size (NEDA 24A or IEC LR03) alkaline battery X 2
Power Consumption: typical 11mA for ACA/DCA and 2.9mA for other functions
APO Timing: Idle for 30 minutes
APO Consumption: typical 190µA
Dimension: L227mm X W78mm X H40mm
Weight: 290 gm approx
Jaw opening & Conductor diameter: 50mm max
Electrical Specifications
|
Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23℃ ± 5℃ & less than 75% R.H. |
| DC Voltage |
| : 400.0 mV |
0.3% + 3d
AC Voltage
|
| 50Hz ~ 500Hz: 400.0mV 1) |
4.0% + 4d
Resistance
|
| : 400.0O |
0.8% + 6d
Audible Continuity Tester
|
| Open Circuit Voltage:: 0.4VDC typical |
Diode Tester
|
| Open Circuit Voltage: Test Current (Typical) |
Capacitance
|
: 500.0nF, 5.000µF, 50.00µF,
500.0µF, 3000µF 1) |
3.5% + 6d2) 3)
DC Current (Clamp-on)
|
| 400.0A: 0.0A ~ 400.0A |
1.5% + 4d 1) 2)
AC Current (Clamp-on)
|
| 400.0A: |
|
|