|
|
|
|
AEMC K110
Catalog #: 2111.73
DC/AC MicroProbe Model K110 (Jack - 10mV/mA - 450mA max)
- Overview
- Specifications
- Summary
- Accessories
Product Highlights
- Measures extremely low level DC from 100µA
- Outputs signal proportional to total current (DC + AC)
- Low noise
- Ultra-compact size and non-contact clamp-on convenience
- Simple plug-in operation
- Designed for use with DMMs and oscilloscopes
- Accurate display of waveforms
- No range or mode (AC/DC) switching required
- Extended battery life
- Red LED indicated momentary or continuous overload
- Green LED indicates power and battery condition
Each Unit Includes
- Microprobe
- 9V Battery
- User Manual
| Specifications |
| Operating Range |
| Current Range |
0 to ±450mADC; 0 to 300mArms. (sinusoidal); 0 to 450mA peak, square and step-discontinuous waveforms |
| Frequency Range |
DC to 1.5kHz (@ -3dB sine) |
| Output Noise |
< 100mV, DC to 3kHz |
| Overload Indication |
Red LED indicates momentary or continuous overload |
| Probe Impedance |
<1mH |
| Reference Conditions |
23°C ±3°, 20 to 75% RH, battery voltage 9V ±0.1V; earth's magnetic field < 40A/m; absence of AC fields; input impedance of display device ³1MW/100 pF; DC or sinusoidal AC current 45 to 65Hz |
| Working Voltage |
300V per IEC 1010-1 Cat. II |
| Influence of Adjacent Conductor |
| Range Value |
50Hz at 23 mm of the probe |
| Influence of Adjacent Conductor |
< 100mA/A |
| Rise Fall Time |
| Rise Time |
< 200µS, 10 to 90% Vout |
| Fall Time |
< 200µS, 90 to 10% Vout |
| Output Signal |
| Output Signal |
10mV/mA |
| Resolution |
| Rang |
DC / AC |
| Resolution |
50µA typical / 100µA typical |
| Accuracy |
| Current Range |
DC / AC |
| Accuracy % of Reading |
0.5% Reading ± 150mA / 0.8% Reading ± 200mA |
| Mechanical Specifications |
| Altitude |
Operating: 0 to 2000m; Non-operating: 0 to 12km |
| Battery Life |
20 hours approximately |
| Cable (Sensor to Electronics) |
5 ft (1.5 m) |
| Colors |
Dark gray |
| Dimensions |
Probe: 4.4 x 0.6 x 1.0" (111 x 15 x 25mm); Electronic Module: 4.9 x 2.5 x 1.1" (124 x 64 x 28mm) |
| Drop Test |
1.0m on 38mm of oak on concrete; Test according to IEC 68-2-32 |
| Low Battery |
Green LED on when battery voltage ³6.5V |
| Maximum Cable Diameter |
3/16", 0.180" (4.5mm) |
| Mechanical Shock |
100g (IEC 68-2-27) |
| Operating Temperature |
-14° to 131°F (-10° to 55°C) |
| Operating Relative Humidity |
< 95% @ £35°C 75% @ 55°C |
| Output |
Two 4mm safety banana jacks, standard 3/4" (19mm) spacing |
| Power Supply |
9V Alkaline, NEDA 1604A, 6LR61 or IEC 6 LF22 |
| Protection Index (IP) |
IP 40 (IEC 529) |
| Storage Temperature |
-40° to 176°F (-40° to 80°C) |
| Vibration |
Test per IEC 68-2-6 |
| Vibration |
| Range Value |
5 to 15Hz / 15 to 25Hz / 25 to 55Hz |
| Vibration |
Amplitude: 1.5 mm per IEC 68-2-6 / Amplitude: 1 mm per IEC 68-2-6 Amplitude : 0.25 mm per IEC 68-2-6 |
| Weight |
9 oz (250g) |
| Zero Adjustment |
10 turn potentiometer |
| External Influences |
| Influence of Temperature |
£500 ppm. /°K or 0.5%/10°C |
| Safety Reference Specifications |
| Safety Ratings |
EN 61010-2-32 |
| Agency Approvals |
CE Mark |
| Clamp Meters/Current Clamp Adaptors / Current Clamps Template |
| Type (Current Clamp Adaptors |
CT |
| Maximum Current |
450 mA (0.45 A) |
| Current Output |
No |
| Voltage Output |
Yes |
| AC Current Only |
No |
| AC/DC Current |
Yes |
| Current Accuracy |
Varies for AC or DC A |
| Maximum Conductor Size Fixed |
0.180 IN |
| CAT Rating |
III |
| CAT Voltage Rating (V) |
300V |
| Connector |
Banana |
| Style (Current Clamps) |
Fixed |
| Externally Powered |
No |
| Unique Features |
The Model K110 provides higher sensitivity and better accuracy with an output of 10mV/mA. It provides AC + DC output signal proportional to the total current under test, without the need of probe ranging or signal filtering. True RMS measurements with total AC + DC components are possible. |
| Warranty |
12 MONTHS (1 YEARS) |
| Calibration Included |
Factory Calibration |
| Power Supply Voltage |
Battery Powered |
| Safety Approval |
CE |
| IP Rating |
IP40 |
| Product Weight |
9 OUNCES (0.562 LBS) |
| Battery Type |
9v |
| Product Height |
1 IN |
| Product Length |
4.4 IN |
| Product Width |
0.6 IN |
| Shipping Weight |
3 LBS |
| ECCN Number |
EAR99 |
| HTS/Schedule B Number |
9030908060 |
| Country of Origin |
United States |
| UPC |
695338050028 |
|
Accessories
| Product |
Price |
 |
AEMC 2133.73
Catalog #: 2133.73
Bag Extra Large Classic Tool Bag (Replacement for Models 3945/3945-B, 6240, 6250, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336 and PEL 105)
|
$100.23
|
 |
AEMC 2152.24
Catalog #: 2152.24
Lead Set of 2, Color-coded (red/black) 5 ft Safety Leads {Rated 1000V CAT IV}
|
$24.21
|
|
|
|