|
|
Fluke Networks CIQ-FTKSFP
Catalog #: 3466887
Network Cable Tester Copper and Fiber Kit
- Overview
- Specifications
- Summary
- Accessories
Product Highlights
- Includes a SimpliFiber Pro (FTK1000) Fiber Test kit
- Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
- Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
- Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
- Identifies unused switch ports that can be reallocated
- Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
- Tests all copper cabling media: twisted-pair, coax, and audio cabling
Each Unit Includes
- 1 - SimpliFiber Pro (FTK1000) Fiber Test Kit
- 1 - CableIQ Reporter PC Software
- 2 - RJ45-RJ45 patch cord
- 1 - Remote Adapter
- 1 - USB Interface Cable
- 1 - Coax "F" push-on adapter
- 4 - "AA" Batteries
- 1 - Carrying Case
- 1 - User Manual CD
| Cable types supported |
UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
| Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
| Supported tests |
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
| Wiremap |
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
| Find fault |
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
| Results storage |
Up to 250 qualification test results |
| Power |
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
| Battery life |
20 hours of typical use, without backlight |
| Other battery types supported |
4AA photo lithium, NIHM, NICAD |
| Dimensions and weight |
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |
| SimpliFiber® Pro Optical Power Meter and Fiber Test Kits Environmental Specifications |
| Temperature range |
Operating: -10º C to 50º C
Storage: -20º C to 50º C |
| Operating Humidity |
95% (10º C to 35º C) Non-Condensing
75% (35º C to 40º C) Non-Condensing
Uncontrolled <10º C |
| EMI, RFI, EMC |
Standards compliant1 |
| Notes |
1 Conforms to relevant European Union directives; Conforms to relevant Australian standards; Listed by the Canadian Standards Association; Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1) |
| Optical Power Meter |
| Detector Type |
InGaAs |
| Calibrated Wavelengths |
850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm |
| Emitter wavelengths |
850/1300 Source: 850 nm and 1300 nm
1310 Source: 1310 nm
1550 Source: 1550 nm |
| Measurement Range |
+10 to -52 dBm (850 nm)
+10 to -60 dBm (1300, 1310, 1490, 1550, 1625 nm) |
| Power Measurement Linearity |
±0.2 dB (850 nm)1
±0.1 dB (1300, 1310, 1490, 1550, 1625 nm)2 |
| Power Measurement Uncertainty3 |
±0.25 dB |
| Display Resolution, dB or dBm |
0.01 dB |
| Auto Dual-Wavelength Switching |
Yes |
| Power Display Units |
dBm, mW, µW |
| Auto-Wavelength Detection |
Yes |
| Data Storage |
1000 records, multiple wavelengths per record |
| External Interface |
USB, 2.0 full speed |
| Optical Connector |
Removable adapter, SC adapter as default, optional adapters include LC, ST |
| Display update rate |
1 reading per second |
| Reference |
Individually set for each wavelength |
| FindFiber ID detection |
Yes |
| Power Requirement |
2 AA Alkaline batteries |
| Battery Life4 |
> 50 Hours (typical) |
| Automatic Power Off |
10, 20, 30 or 60 minutes (can be disabled by user) |
| Low Battery Warning |
Yes, low battery icon blinks |
| Size (L x W x H) |
6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0.cm x 3.9 cm) |
| Weight |
11.5 oz (325 grams) |
| Notes |
1 For 850nm, ±0.2 dB for power from 0 to -45 dBm, ±0.25 dB for power < -45 dBm
2 ±0.1dB for power from 0 to -55 dBm, ±0.2 dB for power > 0 dBm and < -55 dBm
3 23°C ±2°C, power level -20dBm, continuous wave, 62.5/125µm at multi mode wavelengths, 9/125 µm at 1310,1490, 1550 and 1625 nm; add 0.1 dB for 1625 nm
4 For measured power levels 0 dBm or less, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries. |
| Multimode Optical Source |
| Emitter Type |
LED |
| Central Wavelength |
850 nm, 1300 nm |
| Wavelength Accuracy |
850 nm: +30/- 10 nm
1300 nm: +/- 20 nm |
| Spectral Width (FWHM) |
850 nm: 50 nm (typical)
1300 nm: 135 nm (typical) |
| Minimum Output Power |
850/1300 nm: ³ -20 dBm |
| Power Output Stability1 |
±0.1 dB over 8 hours |
| Auto Dual-Wavelength Switching |
Yes. Can be enabled/disabled by user. |
| Optical Output Connector |
Fixed SC |
| FindFiber Code Generation |
Yes. Fixed at ID 1. |
| Modes |
CW, 2 kHz modulated, Auto-wavelength |
| Power Requirement |
2 AA Alkaline batteries. |
| Battery Life2 |
40 hrs (typical) |
| Automatic Power Off |
30 minutes (can be disabled by user) |
| Low Battery Warning |
Yes, LED blinks |
| Size (L x W x H) |
5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm) |
| Weight |
1.8 oz (278 g) |
| Notes |
1 23° C ± 2° C, after 5 minutes warm-up time
2 In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries. |
| Product Height |
12.50 IN |
| Product Length |
23.50 IN |
| Product Width |
16.00 IN |
| Country of Origin |
China |
| Shipping Height |
12.50 IN |
| Shipping Length |
23.50 IN |
| Shipping Width |
16.00 IN |
|