|
|
|
|
Megger MIT320-EN
Catalog #: MIT320-EN
250/500/1000 V Insulation and Continuity Tester with Voltmeter Function
- Overview
- Specifications
- Summary
- Accessories
Product Highlights
- Switched test probe to speed hands free testing
- Backlit display and range selection
- Extremely easy to use
- Tough rubber armoured case
- Self contained protective cover
- Live circuit warning
- Weatherproof to IP54
- Intelligent Safety System for protection.
- Result storage and downloading
- Download software included
- USB interface
Each Unit Includes
- Megger MIT320 Insulation and Continuity Tester
- Test Lead Set and Crocodile Clips
- SP4F Switch Probe
| Insulation ranges |
| Nominal Test Voltage |
1000 V, 500 V, 250 V (d.c.) |
| Measuring Range |
| All instruments |
10 k½ - 999 M½ on all ranges |
| Short Circuit Current |
1.5 mA nominal |
| Test Current on Load |
1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364) |
| Accuracy (at 20° C) |
±3%, ±2 digits |
| Continuity ranges |
| Measuring Range |
0,01 ½ - 99,9 ½ (0 -50 ½ on analogue scale) |
| Open Circuit Voltage |
5 V ±1 V |
| Short Circuit Current |
200 - 215 mA |
| Terminal Characteristics |
| |
| Accuracy (at 20° C) |
±3% ±2 digits |
| Zero Offset Adjust |
0 - 9 ½ |
| Continuity Buzzer |
Adjustable 1 ½ to 20 ½Response time <20 ms |
| Resistance range MIT320/330 |
| (can be used for diode testing) |
| Measuring Range |
10 ½ - 1 M½ |
| Open Circuit Voltage |
5 V |
| Short Circuit Current |
1.5 mA |
| Accuracy (at 20° C) |
±5% ±2 digits up to 100 k½ |
| Voltage range |
| Measuring Range |
0 - 600 V a.c. (50/60 Hz) or d.c. |
| Accuracy (at 20° C) |
d.c. or a.c. (50/60 Hz) ±1%, ±2 digits |
| Temperature coefficient |
<0,1% per °C on all ranges. |
| Default voltmeter |
| (all modes except off) |
>25 V a.c. or d.c. is applied display will operate as a voltmeter. |
| Test inhibit |
If more than 50 volts is detected, testing will be inhibited. |
| AutoPower Down |
Auto power down operates after 10 minutes if left in standby mode. |
| Temperature and humidity |
| Operating Range |
-10°C to +60°C |
| Operating Humidity |
93% R.H. at +40°C max.: |
| Storage Range |
-25°C to +70°C |
| Test Result Storage (1000 results) |
| Job Number |
255 locations |
| Distribution Board no. |
99 locations |
| Circuits |
99 locations |
| Phases |
P1, P2, P3 |
Last recorded result may be recalled to the display.
All data can be downloaded to a PC using Download Manager (supplied) or Megger Powersuite Professional of Windows software |
| Communications |
USB interface |
| Environmental Protection |
IP54 |
| Fuses |
Terminals 500 mA (F) 600 V, 32 x 6 mm Ceramic HBC 10 kA minimum. |
| Display shows if fuse is ruptured. |
| Safety |
Meets the requirements of IEC61010-1 Cat III 600 V phase to earth. |
| Automatic discharge |
After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored. |
| Power supply |
| Battery |
8 x 1,5 V cells IEC LR6 type(AA alkaline).
Rechargeable NiCd or NiMH cells may be used.
Battery condition is constantly shown on the display as a four-section bargraph. |
| Battery Life |
5000 consecutive tests (5 seconds per test) on any test using 2Ah batteries. Weight |
| All units |
980 gms |
| Dimensions |
All units: 203 x 148 x 78 mm (8 x 5.7 x 3.2 inches) |
| E.M.C. |
In accordance with IEC61326 including amendment No.1 |
| Micro / Milli / Meg Ohmmeters/Megohmmeter / Insulation Resistance Testers Template |
| Type |
Battery |
| IR Test Voltage |
1,000 V, 250 V, 500 V |
| Maximum Insulation Resistance |
999 M Ohms (0.999 G Ohms) |
| Minimum Insulation Resistance |
0 Ohms (0 G Ohms) |
| Variable Incremental Voltage |
No |
| Display (Megohmmeter) |
Digital |
| Continuity Test |
Yes |
| Live Circuit Voltage Detection |
No |
| Power Supply |
Battery |
| Timer |
No |
| CAT Rating |
III |
| CAT Voltage |
600 V |
| Unique Features |
Backlit Display, Locking Test Button, Auto Power Off, Voltmeter, Measures up to 600V AC/DC, Switched Test Probe.
Automatic discharge
After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored.
Test inhibit:
If more than 50 volts is detected,
testing will be inhibited. |
| Warranty |
3 YEARS |
| Calibration Included |
Factory Calibration |
| Power Supply Voltage |
Battery Powered |
| Data Logging |
No |
| IP Rating |
IP54 |
| Product Weight |
2.5 LBS |
| Battery Type |
AA |
| Product Height |
3.2 IN |
| Product Length |
8 IN |
| Product Width |
5.7 IN |
| Shipping Weight |
4 LBS |
| ECCN Number |
EAR99 |
| Country of Origin |
United Kingdom |
|
Accessories
| Product |
Price |
 |
Megger 1007-156
Catalog #: 1007-156
SP4F Remote Probe for Megger MIT320 and MIT330
|
$290.23
|
|
|
Megger CB101
Catalog #: 6311-077
Calibrated Check Box for 5kV Insulation Tester
|
$1,045.23
|
|
|
|