|
|
Fluke 725EX
Catalog #: 2098179
Intrinsically Safe Multi-function Process Calibrator
- Overview
- Specifications
- Summary
- Temp. Probes
- IS-Pressure Modules
- Calibration Pumps
- Cases
- DMM Probe Kits
- Current Clamps
- Accessories
Product Highlights
- Class 1 Div. 1 Groups B, C and D Class 1 Zone 0 AEx/Ex ia IIB 171 °C Ta = -10 °C… +55 °C
- I.S. Class I, Division 1 Groups B-D, 171°C compliance
- Measure, source and simulate Volts DC, mA, RTDs, thermocouples, frequency and ohms
- Two channel simultaneous source and measure capability for calibration of transmitters
- Power transmitters with internal loop supply
- Stores frequently-used test setups for later use
- Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
- Pressure switch test function to capture set, reset and deadband values
- Compact size and weight
- Simple, push-button user interface
- Rugged and reliable, for field use
Each Unit Includes
- 1 - Test Lead Set (TL75)
- 1 - Test Clip Set (AC72)
- 2 - Stackable Test Leads
- 1 - Protective Red Holster
- 1 - 725Ex CCD Control Drawing
- 1 - 5/64 in. Short Arm Hex Key
- 4 - AA Batteries
- 1 - Statement of Quality Assurance Practices
- 1 - User Manual
Measurement Accuracy |
Voltage DC |
30.000 V |
0.02%+ 2 counts (upper display) |
10.000 V |
0.02%+ 2 counts (lower display) |
90.00 mV |
0.02%+ 2 counts |
-10.00 mV to 75.00 mV |
0.025 % + 1 count (via TC connector) |
Current DC |
24.000 mA: |
0.02%+ 2 counts |
Resistance |
0.0 to 400.0 Ω |
0.1Ω (4-wire), 0.15Ω (2- and 3-wire) |
401 to 1500 Ω |
0.5Ω (4-wire), 1Ω (2- and 3-wire) |
500 to 3200 Ω |
1Ω (4-wire), 1.5Ω (2- and 3-wire) |
Frequency |
2.0 to 1000.0 CPM |
0.05 % + 1 count |
1.0 to 1100.0 Hz |
0.05 % + 1 count |
1.00 to 10.00 kHz |
0.05 % + 1 count |
Sensitivity |
1 V peak-to-peak-minimum |
Pressure |
Accuracy |
from 0.025% of range using any of 8 intrinsic safe pressure modules. (for detailed specifications refer to pressure modules in options and accessories)
Modules available for differential, gauge, vacuum, absolute, dual and high pressure. |
Source Accuracy |
Voltage DC |
100.00 mV |
0.02%+2 counts |
10.000 V |
0.02%+2 counts |
-10.00 mV to 75.00 mV |
0.025 % + 1 count (via TC connector) |
Current DC |
24.000 mA (Source) |
0.02%+ 2 counts |
24.000 mA (Simulate) |
0.02%+ 2 counts |
Resistance |
15.0 to 400.0 Ω |
0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA) |
401 to 1500 Ω |
0.5 Ω(excitation current 0.05 to 0.8 mA) |
1500 to 3200 Ω |
1 Ω(excitation current 0.05 to 0.4 mA) |
Frequency |
2.0 to 1000.0 CPM |
0.05% |
1.0 to 1100.0 Hz |
0.05% |
1.00 to 10.00 kHz |
0.25% |
Waveform: |
5 V p-p squarewave, -0.1 V offset |
RTDs and Thermocouples |
Measure Accuracy: |
NI-120
PT-100 (385)
PT-100 (393)
PT-100 (JIS)
PT-200 (385)
PT-500 (385)
PT-1000 (385)
Resolution:
J:
K:
T:
E:
R:
S:
B:
L:
U:
N:
Resolution
XK
BP |
0.2 °C
0.33 °C
0.3 °C
0.3 °C
0.2 °C
0.3 °C
0.2 °C
0.1 °C
0.7 °C
0.8 °C
0.7 °C
1.8 °C
1.5 °C
1.4 °C
0.7 °C
0.75 °C
0.9 °C
J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F
0.6°C
1.2°C |
Source Accuracy: |
NI-120
PT-100 (385)
PT-100 (393)
PT-100 (JIS)
PT-200 (385)
PT-500 (385)
PT-1000 (385)
Resolution:
Note:
J:
K:
T:
E:
R:
S:
B:
L:
U:
N:
Resolution
XK
BP |
0.2 °C
0.33 °C
0.3 °C
0.3 °C
0.2 °C
0.3 °C
0.2 °C
0.1 °C
Accuracy stated for 4-wire measurement
0.7 °C
0.8 °C
0.8 °C
0.7 °C
1.4 °C
1.5 °C
1.4 °C
0.7 °C
0.75 °C
0.9 °C
J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C
0.6°C
1.2°C |
Specifications |
Ramp Functions |
Source functions: |
Voltage, current, resistance, frequency, temperature |
Ramps |
Slow ramp, Fast ramp, 25% step-ramp |
Loop Power Function |
Voltage: |
12 V |
Accuracy: |
10% |
Maximum current: |
22 mA, short circuit protected |
Step Functions |
Source functions: |
Voltage, current, resistance, frequency, temperature |
Steps |
25% of range, 100% of range |
Safety Specifications |
Agency Approvals |
ATEX II 1 G Ex ia IIB 171°C
I.S. Class I, Division 1 Groups |
Mechanical & General Specifications |
Size |
130 x 236 x 61 mm
5.188" x 9.291" x 2.402" |
Weight |
0.85 kg (1.874 lbs.) |
Batteries |
4 AA Alkaline batteries |
Warranty |
3 years |
Battery Replacement |
Separate battery compartment, accessible without breaking calibration seal |
Side port connections |
Pressure module connector |
Type |
Hand Held |
Measure Voltage |
Yes |
Loop Voltage Min |
0.001 V |
Simulate Loop Voltage |
Yes |
Loop Voltage Max |
24 V |
Voltage Measurement Max |
30 V |
Voltage Measurement Min |
0.001 V |
Source/Simulate DC Current |
Yes |
Measure DC Current |
Yes |
Current Measurement Max |
24 mA |
Current Measurement Min |
0.001 mA |
Source/Simulate Resistance |
Yes |
Measure Resistance |
Yes |
Resistance Measurement Max |
3.2 K Ohms (3200 Ohms) |
Resistance Measurement Min |
15 Ohms |
Source/Simulate Frequency |
Yes |
Measure Frequency |
Yes |
Frequency Measurement Max |
1 kHz (1000 Hz) |
Frequency Measurement Min |
1 Hz |
Measure RTD |
Yes |
Measure Thermocouples |
Yes |
Source/Simulate Pressure |
No |
Pressure Modules Available |
Yes |
Hart Compatible |
No |
FieldBus Compatible |
No |
Backlighted |
Yes |
Graphical Screen |
Yes |
Types RTD/Thermocouples Accepted |
B, E, J, K, L, N, R, S, T, U |
Intrinsically Safe(Calibrators) |
Yes |
|
Unique Features |
Intrinsically Safe Calibrator. Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx
Pressure Modules. Two channel simultaneous source and measure capability for calibration of transmitters. |
Warranty |
3 YEARS |
Calibration Included |
NIST Calibration |
Power Supply Voltage |
Battery Powered |
Safety Approval |
CSA |
Product Weight |
23 OUNCES (1.44 LBS) |
Product Height |
1.9 IN |
Product Length |
7.9 IN |
Product Width |
3.8 IN |
Country of Origin |
China |
|
Temp. Probes
IS-Pressure Modules
Product |
Price |
|
Fluke 700PCK
Catalog #: 100062
Pressure Calibration Kit
|
$1,875.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P01EX
Catalog #: 4558658
Intrinsically Safe Pressure Calibrator Modules, 0 TO 10 INCH H2O (0 TO 25 MBAR), (0 TO 2.5 KPA)
|
$3,172.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P05EX
Catalog #: 4558664
Intrinsically Safe Pressure Calibrator Modules, 0 TO 30 PSIG (0 TO 2 BAR), (0 TO 200 KPA)
|
$3,172.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P06EX
Catalog #: 4558673
Intrinsically Safe Pressure Calibrator Modules, 0 TO 100 PSIG (0 TO 7 BAR), (0 TO 700 KPA)
|
$3,172.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P09EX
Catalog #: 4558725
Intrinsically Safe Pressure Calibrator Modules, 0 TO 1500 PSIG (0 TO 100 BAR), (0 TO 10 MPA)
|
$3,172.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P24EX
Catalog #: 4558686
Intrinsically Safe Pressure Calibrator Modules, 0 TO 15 PSI (0 TO 1 BAR), (0 TO 100 KPA)
|
$3,172.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P27EX
Catalog #: 4558699
Intrinsically Safe Pressure Calibrator Modules, 0 TO 300 PSIG (0 TO 20 BAR), (0 TO 2000 KPA)
|
$3,172.24
Sign In to See Exclusive Member Price
|
|
Fluke 750P29EX
Catalog #: 4558702
Intrinsically Safe Pressure Calibrator Modules, 0 TO 3000 PSIG (0 TO 200 BAR), (0 TO 20 MPA)
|
$4,621.24
Sign In to See Exclusive Member Price
|
|
Fluke 750PA4EX
Catalog #: 4558716
Intrinsically Safe Pressure Modules, 0 TO 15 PSIA (0 TO 1 BAR), (0 TO 100 KPA)
|
$3,439.24
Sign In to See Exclusive Member Price
|
Calibration Pumps
Cases
DMM Probe Kits
Current Clamps
Accessories
|
|
|