|
|
|
|
Fluke FL62MAX+/323/1AC
Catalog #: 4296076
Handheld Infrared Thermometer, True-RMS Clamp Meter, Voltage Detector
- Overview
- Specifications
- Summary
- Cases
- Accessories
Product Highlights
Fluke 62 MAX+ Handheld Infrared Thermometer
- Ergonomically designed: Completely redesigned for a more natural hand fit.
- Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.
- Dust and water-resistant: IP54 rated for dust and water resistance.
- Rugged: 3-meter (9.8-foot) drop tested.
Additional Features
- Distance to spot: Precise laser technology makes for more accurate and repeatable measurements.
- Dual lasers: The Fluke 62+ MAX has dual rotating lasers to help you identify area to be measured. The measurement area is the spot between the dots.
- Large, backlit display: Large screen makes data easier to read, even in dark areas.
- Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
- Alarm: Hi and Lo alarms for rapid display of measurements outside the limits.
- Power: powered by a single, standard AA battery.
Fluke 323 True-RMS Clamp Meter
- 400.0 A ac current measurement
- 600.0 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement up to 40 kΩ with continuity detection
- Slim, ergonomic design
- CAT IV 300V/CAT III 600 V safety rating
- Hold button
- Two-year warranty
- Soft carrying case
Fluke 1AC-II VoltAlert Voltage Detector
- Voltbeat technology and continuous self-test — so you always know it’s working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
Each Unit Includes
- Infrared Thermometer, -22-1202°F Range, 12:1 Ratio (62 MAX+)
- True-RMS AC/DC Clamp Meter, 400A AC, 600V AC/DC (323)
- VoltAlert AC Voltage Tester, 90-1000V AC (1AC-A1-II)
- Test Lead Set
- Soft Carrying Case (C115)
- User Manual
Fluke 62 MAX+ Handheld Infrared Thermometer
| Specifications |
| Temperature Range |
Fluke 62 MAX -30 °C to 500 °C (-22 °F to 932 °F)
Fluke 62+ MAX -30 °C to 650 °C (-22 °F to 1202 °F) |
| Accuracy |
Fluke 62 MAX ±1.5 °C or ±1.5% of reading, whichever is greater-10 °C to 0 °C: ±2.0-30 °C to -10 °C: ±3.0Fluke 62+ MAX ±1.0 °C or ±1.0% of reading, whichever is greater-10 °C to 0 °C: ±2.0-30 °C to -10 °C: ±3.0 |
| Response Time (95%) |
Fluke 62 MAX <500 ms (95% of reading)
Fluke 62+ MAX <300 ms (95% of reading)
Spectral Response 8 to 14 microns
Emissivity 0.10 to 1.00 |
| Display Resolution |
0.1 °C (0.2 °F) |
| Repeatability of Readings |
Fluke 62 MAX ±0.8% of reading or <±1.0 °C (2 °F), whichever is greater
Fluke 62+ MAX ±0.5% of reading or <±0.5 °C (1 °F), whichever is greater |
| Power |
AA battery |
| Battery Life |
Fluke 62 MAX 10 hours with laser and backlight on
Fluke 62+ MAX 8 hours with laser and backlight on |
| Physical Specifications |
| Weight |
255 g (8.99 oz) |
| Size |
(175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches |
| Operating Temperature |
0 °C to 50 °C (32 °F to 122 °F) |
| Storage Temperature |
-20 °C to 60 °C (-4 °F to 140 °F), (without battery) |
| Operating Humidity |
10 % to 90 % RH non-condensing at 30 °C (86 °F) |
| Operating Altitude |
2000 meters above mean sea level |
| Storage Altitude |
12,000 meters above mean sea level |
| IP Rating |
IP 54 per IEC 60529 |
| Drop Test |
3 meters |
| Vibration and Shock |
IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms |
| EMC |
EN 61326-1:2006 EN 61326-2:2006 |
|
| Standards and Agency Approval |
Compliance EN/IEC 61010-1: 2001
Laser Safety FDA and EN 60825-1 Class II |
Fluke 323 True-RMS Clamp Meter
| Specifications |
| AC current |
| Range |
- |
| Accuracy |
2 % ± 5 digits
(45 Hz to 65 Hz)
2.5 % ± 5 digits
(65 Hz to 400 Hz) |
| DC current |
| Range |
- |
| Accuracy |
- |
| AC voltage |
| Range |
600.0 V |
| Accuracy |
1.5 % ± 5 digits |
| DC voltage |
| Range |
600.0 V |
| Accuracy |
1.0 % ± 5 digits |
| Resistance |
| Range |
400.0 Ω / 4000 Ω |
| Accuracy |
1 % ± 5 digits |
| Continuity |
= 7 Ω |
| Capacitance |
- |
| Frequency |
- |
| AC response |
True-rms |
| Backlight |
- |
| Data hold |
Yes |
| Contact temperature |
- |
| Min/Max |
- |
| Size |
| H x W x D (mm) |
207 x 75 x 34 |
| Max wire diameter |
30 mm (600 MCM) |
| Weight |
265 g |
| Category rating |
CAT III 600 V
CAT IV 300 V |
Fluke 1AC-A1-II Voltage Detector VoltAlert
| Specifications |
| Operating principle |
Senses the steady state electrostatic ?eld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage sensing ranges |
Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model |
| Detector tip style |
Blade or round, depending on model |
| Light source |
One high intensity red LED |
| Agency Approvals |
c CSA us, CE, TUV, C-Tick |
| Safety Rating |
1000 V, CAT IV |
| IP Rating |
IP 40 |
| Operating temperature |
-10 °C to 50 °C |
| Operating humidity ranges |
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C) |
| Operating Altitude |
3000 meters |
| Batteries |
2 AAA alkaline batteries included |
| Clamp Meters/Clamp Meters Template |
| Type |
Standard Style |
| True RMS |
Yes |
| Maximum Current AC |
400 A |
| Maximum Voltage AC |
600 V |
| Maximum Voltage DC |
600 V |
| Basic Voltage Accuracy |
AC: 1.5 % ± 5 digits
DC: 1.0 % ± 5 digits |
| Maximum Conductor Size |
30 MM (1.18 IN) |
| Auto Ranging/Manual |
Auto Ranging |
| Detachable Jaw |
No |
| Rotating Jaw / Swivel |
No |
| Peak Hold |
Yes |
| Min/Max |
No |
| In-Rush Current |
No |
| Dual Display |
No |
| Analog Bargraph on Display |
No |
| Backlight |
Yes |
| Remote Display |
No |
| Resistance |
Yes |
| Frequency |
No |
| Continuity |
Yes |
| Capacitance |
No |
| Temperature (K T/C) |
No |
| Temperature (IR Sensor) |
No |
| Diode Testing |
No |
| CAT Rating |
IV |
| CAT Voltage |
300 V, 600 V |
| Overload Protector |
No |
| Voltage / Continuity and Non-Contact Testers/Non-Contact Voltage and Current Detectors Template |
| Style (voltage) |
Pen |
| AC Volts |
Yes |
| DC Volts |
No |
| Voltage Display |
No |
| Audible Alert |
Yes |
| Visual Alert |
Yes |
| Data Hold |
No |
| Resistance Testing |
No |
| Continuity Test |
No |
| Continuous Self Test |
Yes |
| Thermometers/IR Thermometers Template |
| IR Temperature Max |
650 C (1202 F) |
| IR Temperature Min |
-30 C (-22 F) |
| Field View Ratio (Spot Ratio) |
12:1 |
| Accuracy |
≥0°C: ±1.5°C or ±1.5 % of reading, whichever is
greater (≥32°F: ±3°F or ±1.5 % of reading, whichever is greater)
≥-10°C to <0°C: ±2°C(≥14°F to <32°F: ±4°F)
< -10°C: ±3°C(<14°F: ±6°F) |
| Laser Pointer |
Yes |
| Emissivity Adjustable |
Yes |
| Alarm |
Yes |
| Max./Min. |
Yes |
| Memory Recall |
No |
| Thermocouple Input |
No |
| Food Safe |
No |
| Data Logging |
No |
| Unique Features |
62 MAX+
-10 foot drop test proof
-Dust and water-resistant: IP54 rated for dust and water resistance.
-Battery life 10 hours with laser and backlight on
-Dual Lasers
-Min/Max/Avg/Dif function
-Hi and Lo alarm |
| Power Supply Voltage |
Battery Powered |
| IP Rating |
IP54 |
| Battery Type |
AA |
| Country of Origin |
China |
|
Cases
| Product |
Price |
 |
Fluke C50
Catalog #: 762823
Meter Case
|
$58.24
|
|
|
Fluke C550
Catalog #: 1547919
Tool Bag
|
$145.24
|
Accessories
| Product |
Price |
|
|
Fluke 80PR-60
Catalog #: 2148313
RTD Temperature Probe
|
$134.24
|
|
|
|