|
|
|
|
Fluke I30S
Catalog #: 2584935
Current Clamp Adaptor
- Overview
- Specifications
- Summary
Product Highlights
- The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current
- The i30s may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement
| Electrical specifications |
| Specified current range |
30 mA to 30A dc, 30 mA to 20 A ac rms |
| Usable current range |
5 mA to 30 A dc, 30 mA to 20 A ac rms |
| Crest Factort |
1.4" |
| Output sensitivity |
100 mV/A |
| Accuracy (at +25 °C) |
± 1 % of reading ± 2 mA |
| Resolution |
± 1 mA |
| Load impedance |
> 10 k Ohms and ≤ 100pF |
| Conductor position sensitivity |
± 1 % relative to center reading |
| Frequency range |
DC to 20 kHz (- 0.5 dB) |
| Temperature coefficient |
± 0.01 % of reading/°C |
| Power supply |
9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator |
| Working voltage (see Safety Standards section) |
300 V ac rms or dc |
| General Specifications |
| Maximum conductor size |
19 mm diameter |
| Output connection |
Safety BNC connector, supplied with safety 4 mm adapter |
| Output zero |
Manual adjust via thumbwheel |
| Cable length |
2 meters |
| Operating temperature range |
0 °C to +50 °C |
| Storage temperature range (with battery removed) |
-20 °C to +85 °C |
| Operating humidity |
15 % to 85 % (non-condensing) |
| Weight |
250 g |
| Safety standards |
BS EN 61010-1:2001
BS EN 61010-2-032:2002
BS EN 61010-031:2002
300 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz. |
| EMC Standards |
EN 61326: 1998 +A1, A2, & A3 |
| Clamp Meters/Current Clamp Adaptors / Current Clamps Template |
| Type (Current Clamp Adaptors |
CT |
| Maximum Current |
30 A |
| Current Output |
No |
| Voltage Output |
Yes |
| AC Current Only |
No |
| AC/DC Current |
Yes |
| Maximum Conductor Size Fixed |
0.748 IN |
| CAT Rating |
III |
| CAT Voltage Rating (V) |
300V |
| Connector |
BNC |
| Style (Current Clamps) |
Fixed |
| Battery Powered |
Yes |
| Externally Powered |
No |
| Test Equipment General Attributes |
| Warranty |
1 YEARS |
| Calibration Included |
Factory Calibration |
| Power Supply Voltage |
Battery Powered |
| Safety Approval |
CE |
| Data Logging |
No |
| Interfaces I/O |
Analog Output |
| Product Weight |
0.55 LBS |
| Battery Type |
9v |
| Product Height |
1.0 IN |
| Product Length |
7.2 IN |
| Product Width |
2.8 IN |
| Shipping Weight |
3 LBS |
| Country of Origin |
China |
|
|
|
|